Internal Wall Insulation in Glenrothes: Warming the Solid Stone Cottages Around the New Town
Survey and advice
-
Stripped to the stone
-
A lime parge
-
Hemp in the frame
-
Wood-wool board
-
Lime plaster with mesh
-
Finished and painted
Illustration: a vapour-open system on a stone wall
-
Stripped to the stone
-
A lime parge
-
Hemp in the frame
-
Wood-wool board
-
Lime plaster with mesh
-
Finished and painted
Solid Wall Insulation in Glenrothes When Your House Has No Cavity
Internal wall insulation in Glenrothes raises one fear above the rest for owners of older stone houses.
-
Will lining the walls trap damp in the stone, where it can rot the timber built into them?
-
Glenrothes was built as a new town, so many houses here have cavity walls.
-
The older cottages and houses in Leslie, Markinch and on the farms around the town tend to be solid stone, with no cavity to fill.
-
Stone takes in rain and dries it back out through its lime mortar and plaster.
-
Foil-backed plastic foam board, a common choice for lining walls, stops that drying. Damp then sits in the stone behind the board, out of sight until the plaster starts to stain.
-
Lining an outside wall also brings it about 120mm into the room.
-
If that wall has a cornice or plaster mouldings, the work means taking them down.
-
They are recreated in lime once the insulation is in, and at the survey we agree exactly who does that work.
The fear of a botched job is fair.
A National Audit Office study of insulation fitted through ECO4 and GBIS logged major defects on roughly 98% of outside wall jobs and 29% of inside ones, more than 30,000 homes between them.
Our internal wall insulation for stone walls puts lime straight onto the bare stone in a thin first coat. Scottish hemp, wood wool board and a lime plaster finish follow.
Each layer lets damp pass through and dry off.
The trade calls that vapour-open.
Our process
Our Internal Wall Insulation Process in Glenrothes, Step by Step
We start with a free survey of your walls, and you see the two systems we fit before anyone strips a wall.
-
Step 1
Free Survey and Tailored Design
Calum or Lewis looks at the stone outside, the plaster inside and any damp patches. You get every suitable option in writing, with what each one costs in money and in room depth.
-
Step 2: the split
The honest comparison
Your wall’s material, finish and modelling decide which of these two systems suits it.
-
Right for most stone
Natural system that lets stone dry
Lime + hemp or wood wool
Illustration: vapour from the room passes through each layer and the stone keeps drying. - + The wall keeps drying out
- + Can mostly be taken out again later, and keeps the stone healthy
- + Right for most solid sandstone walls
- − Costs more and takes longer to prepare and fit
- − Thicker, so you lose a little more room
-
On the right wall
Membrane system that keeps room moisture out
Pro Clima membrane + insulation
Illustration: the membrane holds vapour from the room back, before it reaches the wall. - + For brick that soaks up little water, or brick that is rendered or painted
- + Can be thinner in some cases
- − Only used where our moisture modelling shows it is safe
- − Wrong for a normal sandstone wall, which soaks up water
-
-
Step 3
Specialist Installation
Our installers strip the wall to stone. After the plasterer’s first thin lime coat, they fit the frame and hemp. The plaster coats follow, and the next coat waits until the last one has dried.
-
Step 4
Aftercare and Guarantee
Before the plaster hides them, we photograph the layers for your records. You also get your 25-year workmanship guarantee and a list of paints that suit a lime finish.
-
Where we say no
What we will not do
Foam board glued onto sandstone
We won’t glue a sealed polystyrene or foam board onto a solid sandstone wall to bring the price down. If that is the only way to a cheaper quote, we will tell you so and advise against it.
Inside the wall
Your wall, insulated layer by layer
Each card shows one build going onto a wall, from bare masonry to a finished room, in the order our fitters work. The pictures are illustrations.
Illustration: heritage system
-
Stripped to the stone
Our fitters strip the old plaster and timber laths back to bare sandstone, so no hidden wood is left to rot. Cornicing on these walls comes down too, and is remade in lime after the insulation goes in.
-
A lime parge
Then a coat of lime, called a parge, goes over the stone. It fills the hollows where damp air could sit and turn to water.
-
Hemp in the frame
Our fitters press two 50mm layers of Scottish-made IndiTherm hemp into a 45mm timber frame fixed over the lime. This is the layer that keeps the heat in your room.
-
Wood-wool board
Wood-wool board, a stiff sheet of bound wood shavings, goes over the hemp next. It gives the lime plaster a solid face to grip and still lets moisture pass through.
-
Lime plaster with mesh
Lime plaster goes on next, with a mesh bedded into it.
-
Finished and painted
A smooth lime finish leaves the wall about 120mm further into the room than before. At handover you get paint guidance, so the finish keeps letting the wall dry.
Hemp, wood wool and lime on bare sandstone
This vapour-open build suits most solid sandstone walls. Each layer lets moisture pass, so the stone behind it can keep drying out.
Illustration: membrane system
-
Stripped back to brick
The old plaster comes off the inside of the wall, back to the brick.
-
Hemp packed into a frame
Our fitters pack hemp insulation into a timber frame fixed over the brick.
-
The Intello Plus membrane
A Pro Clima Intello Plus membrane goes across the frame to keep room moisture out of the wall.
-
Plasterboard and skim
Plasterboard goes over the membrane, and a skim coat finishes the wall.
Hemp and a membrane for the right brick wall
Some walls are brick, and where that brick is rendered or takes up little water, a sealed build can suit it better.
It finishes in plasterboard and a skim coat, so it goes in faster than the lime build.
At your survey, Calum or Lewis checks each outside wall, and Calum tells you which build each one suits.
Why Glenrothes Owners of Older Stone Houses Choose Us
Insulation planned around how your Glenrothes walls take in damp and dry out.
-
We confirm it’s solid stone before pricing
Calum or Lewis, our surveyor, checks the wall inside and out. If it turns out to have a cavity, we tell you on the day and price the right job for that wall instead.
-
A design checked for walls like yours
We match your wall to one of our tested designs for Scottish walls. Each has been run through WUFI, a program that forecasts where damp ends up inside a wall over many years.
-
Lime from the first coat to the last
Hemp goes into a timber frame with a wood wool board over it. Our trusted lime plasterer lays every coat, from the first thin one on the stone to the finish.
-
The better material, even at a lower margin
Hemp and lime are dearer to buy than foam board, so every job that uses them earns us less. Calum still recommends them on stone, since they let the wall dry.
-
Crews based in East Kilbride
Our crews drive through from East Kilbride, so surveys are booked in ahead and the lime work is planned around drying time. We work on stone houses in Kirkcaldy the same way.
-
Independent checks where the job needs them
Some funded jobs need a PAS 2035 retrofit check. That check is done by qualified external coordinators, and Calum signs off the design and the quote.
The honest bit: period features
Cornicing, shutters and panelling on the walls we insulate have to come off, and they can’t be saved. Cornicing on walls we don’t line stays. Once the insulation is in, our specialist lime plasterer remakes the plaster mouldings and our joiner remakes the woodwork.
Solid Wall Insulation in Glenrothes: The Cost Once the Grant Comes Off
Lining old stone runs anywhere from £10,000 to £50,000, and jobs we win usually come to £14,000 to £25,000.
How many outside walls you have, and how sound the plaster is, set what internal wall insulation costs in your house.
- GrantUp to 75%, if you qualify
- Walls cap£7,500 in any postcode
- LoanOptional, interest-free, up to £2,500
- InstallerTrustMark-registered
Where the full grant is awarded, a £14,000 job costs you about £6,500 and a £25,000 job about £17,500.
- Home Energy Scotland can pay up to 75% of the cost, capped at £7,500 for solid wall work.
- Wall work stays capped at £7,500 wherever you live.
Homes with a rural or island postcode get a £9,000 cap across the whole house, and that extra £1,500 is only of use if a loft or floor goes in with the walls.
- Home Energy Scotland runs the application and decides who qualifies. It only funds TrustMark-registered installers, which we are, and we send it the installer paperwork it asks for.
- Alongside the solid wall insulation grant, HES offers an interest-free loan for wall work, up to £2,500.
Rated 5.0 on Google by homeowners across central Scotland.
Solid stone walls need to dry out, and foam board stops them.
-
1Bare solid stone
Old solid stone walls handle damp the way they always have: they soak it up, then let it dry off both the inside and the outside. They have no cavity and no plastic layer, and that works for as long as the wall can keep drying.
-
2Foil-faced foam board
Foil-backed plastic foam board or sealed foam stuck straight onto the inside of the wall stops that drying. Warm, moist air from your rooms still reaches the cold stone behind it, turns to water and has nowhere to go. That trapped water causes the damp people blame on insulation.
-
3Vapour-open build-up
Our system uses lime, hemp and wood wool, which let that moisture pass through and dry off (the trade calls this vapour-open). When we plan the layers for your wall, it stays warm and keeps drying.
Internal wall insulation in Glenrothes, with the damp risk checked first.
Our designs come from WUFI modelling, computer software that tracks how heat and damp move through the wall layers over several years. A solid wall needs that long to settle to a steady moisture level: roughly five years for brick and ten for stone.
-
About 5 yearsbrick, drying to equilibrium
-
About 10 yearsstone, drying to equilibrium
For a typical stone wall, we use a set of layers we have already modelled. We model a larger, listed or unusual building from scratch, and quote that as a separate service. Either way, we can show you the damp risk as a figure on paper.
Ask your own questions about internal wall insulation in Glenrothes.
Not sure if your Glenrothes house is solid stone or cavity brick? Calum or Lewis will confirm it on the free survey, before you see a price.
Ballagan Farm, Strathblane
A two-storey farmhouse under full renovation, where poor insulation had left the walls damp. We stripped the walls back to bare stone and gave them a thin coat of lime. Then we fitted IndiTherm hemp and wood-wool boards and finished the sloping ceilings and the solid sandstone walls in lime plaster. We insulated the loft with Knauf Earthwool 44.
Auchinlay House, Dunblane
An internal wall and room-in-roof project for a homeowner getting ready for a heat pump, who wanted the bedrooms comfortable all year. On the walls we used hemp, wood-wool board and lime plaster, which let the wall dry. The sloping ceilings and dormers got a sealed system of PIR foam board and Superfoil SF19+, and the upper loft got Knauf Earthwool.
Mount Hope, Bridge of Allan
The client was renovating an old sandstone wing of their period home. We fitted 100mm Sisalwool, wood-wool board and lime plaster on four walls, which lets the stone dry. On one large gable wall we took out the dropped ceiling and built an insulated vaulted ceiling in its place.
Belhaven Terrace Lane, Glasgow
A West End owner wanted the whole house warmer. We insulated the ground-floor walls from the inside and the upstairs bedrooms in the roof space. The stone walls got layers that let them dry, because this sandstone soaks up a lot of water. In the sloping ceilings, a sealed layer stops warm, moist air reaching the roof spaces.
Observatory Lane, Glasgow
Internal wall insulation for a client of Oscar J Murray Architects, part of a whole-house renovation in Glasgow’s West End. We fitted IndiTherm hemp on the stone walls, dormers and sloping ceilings, and finished the walls in lime plaster. A Pro Clima Intello membrane went on the sloping ceilings, and Contega Solido tape seals the gaps round the windows.
Protected, and built to the standard the grant requires.
Our workmanship is guaranteed for 25 years. If our workmanship fails, we come back and put it right. We take no deposit, so nothing is paid up front. Payment is on 7-day terms: you are invoiced after completion, once you have seen the finished work and the photographs, and pay within seven days.
-
25-year workmanship guarantee
It’s put in writing for you when the job is finished.
-
TrustMark and PAS 2030 certified
Audited to the standards the grant requires.
-
No deposit
Nothing leaves your account before the work begins.
-
Payment on 7-day terms
We send the invoice when the job is complete, and you have seven days to pay it.
Internal Wall Insulation in Glenrothes: The Questions We Get Asked
Straight answers on cost, grants, systems and coverage area.
Typical jobs we win cost £14,000 to £25,000. If you qualify for the whole £7,500 grant, your share drops to about £6,500 to £17,500. Fewer outside walls to line usually means a lower price.
Each option in the quote comes with its own price and the honest case for it.
Book Your Free Survey ↓Up to £7,500, if Home Energy Scotland approves your application. It pays up to 75% of the cost, and only when a TrustMark-registered installer such as us does the work. That cap stays the same in every postcode.
Check your eligibility with Home Energy Scotland, then book the survey so your application has a written price behind it.
Book Your Free Survey ↓Not if every layer lets the stone dry. Foam board and foil hold damp against the wall. Hemp, wood wool and lime let it move through to the room, where normal heating and airing carry it off. Sealed linings are behind most cases where a stone wall turns damp after insulating.
Calum or Lewis checks for existing damp on the survey visit, so point out any patches you have noticed.
Book Your Free Survey ↓Age and wall thickness are the quickest clues. Older stone cottages and houses nearly always have solid walls, much thicker than a cavity wall when you measure across a window opening. Our survey confirms it before you see a price.
About 105 to 125mm on each lined wall, so plan on 120mm. Skirtings, sockets and radiators move forward, and window reveals get deeper. The survey measures every wall you want lined.
Usually one to three weeks. Fitting the frame and hemp is quick. The lime coats take the longest, since every coat must dry out before another goes over it.
Yes, both. We survey and line stone houses there on the same terms, with surveys booked in ahead.
Book Your Free Survey.
Tell us about your property and we will be in touch to arrange a survey.



