Internal Wall Insulation in Hamilton: Getting It Right the First Time, or Putting It Right the Second
Old sandstone tenements, villas and cottages insulated with hemp, wood wool and lime, which let the wall go on drying. Surveyed and designed for your wall type from build-ups already modelled for Scottish stone, with Home Energy Scotland grant funding if you qualify.
Top-floor tenement, conservation area
-
Stripped to the stone
-
A lime parge
-
Hemp in the frame
-
Wood-wool board
-
Lime plaster with mesh
-
Finished and painted
Illustration: a vapour-open system on a stone wall
-
Stripped to the stone
-
A lime parge
-
Hemp in the frame
-
Wood-wool board
-
Lime plaster with mesh
-
Finished and painted
Solid Wall Insulation in Hamilton: When a Previous Job Gets It Wrong
You may have found a damp patch behind a wardrobe in Cadzow, or a soft patch by the skirting in Silvertonhill.
-
In Hamilton that is usually the first sign of a wall somebody else insulated wrong, a winter or two after the board went on.
-
Putting it right costs more than doing the job properly first time.
In October 2025 the National Audit Office reported that around 98% of external and 29% of internal wall insulation audited under ECO4 and GBIS carried major defects, across more than 30,000 homes.
A generic board fitted without reading the wall first is what we strip out before the real job starts.
First-time jobs and repairs get the same result here, a warm house on a dry wall.
Sandstone stays sound as long as damp can keep moving through it and out, so every layer we add stays vapour-open, the method behind all our internal wall insulation work.
Where an old board has already trapped water, we strip it out and let the wall dry before anything new goes on, because the layers, far more than the brand, decide whether internal wall insulation causes damp.
Your rooms warm up, and the stone behind them stays dry and sound.
How we design internal wall insulation in Hamilton.
Your wall’s make-up and the way it handles water set the build-up. A heritage install on a Hamilton stone wall runs through the six stages below.
-
Survey and design
Calum or Lewis, our surveyor, surveys the house and Calum designs the build-up for your wall. We match it to computer models (WUFI) of how heat and damp move through Scottish wall types, so we can show you the modelled moisture risk for a wall like yours before any work starts.
-
Stone exposed, then lime-coated
We take off old plaster where we need to, and our lime plasterer puts a thin lime coat on the bare stone, so damp can spread and dry evenly.
-
Vapour-open insulation
Our own fitters set IndiTherm hemp, usually two layers (or wood wool or Sisalwool), in a timber frame, and it stays vapour-permeable the whole way through.
-
Wood-wool board and lime plaster
Our fitters fix a wood-wool board over the frame, and our lime plasterer finishes with two coats of lime plaster on mesh, so the entire build-up stays vapour-open.
-
Membranes only where modelled
We fit a sheet that stops room moisture reaching the wall only where the modelling calls for it, usually on rendered brick or brick that soaks up little water.
-
Finishes, paints and EPC
You get guidance on vapour-open mineral or silicate paints and aftercare, plus a post-installation EPC where relevant.
The honest bit: period features
Existing cornicing, shutters and panelling on the walls we insulate must be removed and cannot be saved. The cornicing is recreated in lime once the insulation is in, and at the survey we agree exactly who does that work, including replacement panelling.
Inside the wall
Your wall, insulated layer by layer
Each card shows one build going onto a wall, from bare masonry to a finished room, in the order our fitters work. The pictures are illustrations.
Illustration: heritage system
-
Stripped to the stone
Our fitters strip the old plaster and timber laths back to bare sandstone, so no hidden wood is left to rot. Cornicing on these walls comes down too, and is remade in lime after the insulation goes in.
-
A lime parge
Then a coat of lime, called a parge, goes over the stone. It fills the hollows where damp air could sit and turn to water.
-
Hemp in the frame
Our fitters press two 50mm layers of Scottish-made IndiTherm hemp into a 45mm timber frame fixed over the lime. This is the layer that keeps the heat in your room.
-
Wood-wool board
Wood-wool board, a stiff sheet of bound wood shavings, goes over the hemp next. It gives the lime plaster a solid face to grip and still lets moisture pass through.
-
Lime plaster with mesh
Lime plaster goes on next, with a mesh bedded into it.
-
Finished and painted
A smooth lime finish leaves the wall about 120mm further into the room than before. At handover you get paint guidance, so the finish keeps letting the wall dry.
Hemp, wood wool and lime on bare sandstone
This vapour-open build suits most solid sandstone walls. Each layer lets moisture pass, so the stone behind it can keep drying out.
Illustration: membrane system
-
Stripped back to brick
The old plaster comes off the inside of the wall, back to the brick.
-
Hemp packed into a frame
Our fitters pack hemp insulation into a timber frame fixed over the brick.
-
The Intello Plus membrane
A Pro Clima Intello Plus membrane goes across the frame to keep room moisture out of the wall.
-
Plasterboard and skim
Plasterboard goes over the membrane, and a skim coat finishes the wall.
Hemp and a membrane for the right brick wall
Some walls are brick, and where that brick is rendered or takes up little water, a sealed build can suit it better.
It finishes in plasterboard and a skim coat, so it goes in faster than the lime build.
At your survey, Calum or Lewis checks each outside wall, and Calum tells you which build each one suits.
Why vapour-open, and why it matters for Hamilton’s stone.
-
1Bare solid stone
Solid sandstone and rubble-stone walls handle water as they always have: they absorb it, then evaporate it off both faces. No cavity, no membrane, no plastic, and it works indefinitely as long as the wall keeps drying.
-
2Foil-faced foam board
Plastic foam board with a foil face, glued to the inside of the wall in blobs, breaks that. Warm internal moisture hits a cold sealed layer, condenses, and has nowhere to go. That is the damp people blame on insulation.
-
3Vapour-open build-up
A vapour-open build-up of lime, hemp and wood wool lets the vapour through instead, and the wall keeps drying because somebody designed the build-up for your wall, whatever brand of insulation goes in. The same building science sits behind wall insulation on Glasgow’s tenements, and it applies just as directly to Hamilton’s stone terraces.
Calculated for your Hamilton wall, not guessed.
Our designs are built on WUFI modelling, computer software that tracks heat and damp through the wall layers for as long as a solid wall takes to dry out, roughly five years for brick, ten for stone.
-
About 5 yearsbrick, drying to equilibrium
-
About 10 yearsstone, drying to equilibrium
A Hamilton stone wall is matched to a build-up from our validated library, one already modelled against masonry like yours. So before any work starts, we can show you the modelled moisture result.
The honest comparison
Lime + hemp or wood wool
- + Moisture keeps passing out of the wall
- + Can mostly be undone, and gentle on the stone
- + Right for most solid sandstone walls
- − Costs more, takes longer, more prep
- − Slightly more room lost to depth
Barrier sheet + insulation
- + Suits brick that is rendered, painted or slow to soak up water
- + Can be thinner in some cases
- − Only correct where modelling supports it
- − Wrong on a typical absorbent sandstone wall
Our line in the sand
What we will not do
Sealed foam on solid sandstone
We won’t put a sealed polystyrene or foam board onto a solid sandstone wall to hit a budget. If that’s what it would take to land a cheaper number, we’ll tell you honestly and recommend against it.
What Hamilton homeowners ask before they commit.
Not when it is designed for the wall. We use vapour-open materials and base the design on modelling of how moisture behaves, so the wall keeps drying. That is also why a vapour-open build-up needs no conventional plastic vapour barrier.
A vapour-open build-up adds some depth. How much depends on the system, on how much space we gain back when the old lath and plaster comes off, and on the depth of the lime parge, which we do not know exactly until we open up. Plan on roughly 120mm per wall, somewhere between 105mm and 125mm, and we talk it through room by room when we survey your Hamilton home.
At the survey we work out the depth for each room you plan to insulate.
Book Your Free Survey ↓On a solid-wall job, yes. To strip the wall back we have to remove the existing cornicing, shutters and panelling on those walls, and they cannot be saved. The cornicing is recreated in lime once the insulation is in, and at the survey we agree exactly who does that work, including replacement wood panelling if you want it.
Usually yes. External insulation is normally unacceptable on a sandstone frontage, which is why internal vapour-open systems are the appropriate route. We have worked in conservation areas and will tell you honestly what is feasible.
Mention the listing or the conservation area when you book, so the survey covers what consent will need.
Book Your Free Survey ↓A vapour-open system protects the fabric and improves the EPC, both of which support the value of a period home in Hamilton. We will give you a straight view of payback for your situation.
Ballagan Farm, Strathblane
A full renovation of a two-storey farmhouse where the walls were damp from being poorly insulated. We stripped them back to the bare stone, parged them in lime, then insulated with IndiTherm hemp and wood-wool boards before finishing in lime plaster across both the sloping ceilings and the solid sandstone walls. The loft was insulated with Knauf Earthwool 44.
Auchinlay House, Dunblane
An internal wall and room-in-roof project for a homeowner preparing to install a heat pump and make the bedrooms comfortable year round. We used a vapour-permeable build-up of hemp, wood-wool board and lime plaster on the walls, paired with a vapour-closed system of PIR and Superfoil SF19+ on the sloping ceilings and dormers, plus Knauf Earthwool in the upper loft space.
Mount Hope, Bridge of Allan
The client was renovating an old sandstone wing of their period property. We installed a vapour-permeable system of 100mm Sisalwool, wood-wool board and lime plaster across four walls, including one large gable wall where the dropped ceiling was removed to create an insulated vaulted ceiling.
Belhaven Terrace Lane, Glasgow
A West End client looking to improve thermal performance across the whole home. The property was given internal wall insulation across the ground floor and room-in-roof insulation in the upstairs bedrooms. A vapour-open design for the stone walls was paired with vapour-closed insulation in the sloping ceilings, keeping the high-absorption sandstone able to dry while stopping warm, moist air reaching the roof spaces.
Observatory Lane, Glasgow
An internal wall insulation project carried out for a client of Oscar J Murray Architects as part of a whole-house renovation in Glasgow’s West End. We used IndiTherm hemp insulation on the stone walls, dormers and sloped ceilings, finished in lime plaster, with a Pro Clima Intello membrane on the sloping ceilings and Contega Solido airtightness tape around the windows.
Internal wall insulation in Hamilton, protected for 25 years.
We often specify the better, more expensive vapour-open products because they are right for the house. Your quote still shows the cheaper options, with our honest view of each. The same workmanship guarantee covers our underfloor insulation in Hamilton.
-
25-year workmanship guarantee
Given to you in writing.
-
No deposit, pay after completion
Payment is due within 7 days of completion.
-
TrustMark and PAS 2030 certified
Audited to the grant’s standards. Calum or Lewis, our surveyor, carries out the survey, and Calum signs off the design.
-
Our own employed fitters
No agency labour and honest advice. We turn down work that is not right for the wall.
Internal wall insulation in Hamilton: your questions answered.
Straight answers on cost, damp, room loss, grants and conservation areas.
It is insulation fitted to the inside face of a solid wall, used where there is no cavity to fill. On a stone home it should be a vapour-open build-up so the wall can keep drying.
Costs run from £10,000 to £50,000 across the market, driven mainly by the size of the property and the state of the walls behind the plaster. Most of the jobs we take on in Hamilton land between £14,000 and £25,000. Because the Home Energy Scotland grant is capped at £7,500 per property, an eligible household on that band still contributes between £6,500 and £17,500 once the grant is applied. Where we are stripping out a previous installer’s failed board first, that work is priced as its own line at survey rather than folded into a headline figure, so you can see what you are paying to put right against what you are paying to insulate properly for the first time. Calum prices every wall from what the survey finds.
Each option in the quote comes with its own price and the honest case for it.
Book Your Free Survey ↓The signs are usually smaller than people expect before they turn into a real problem: a patch of damp behind a wardrobe or bed pushed against an external wall, paint that keeps blistering in the same spot no matter how often it is redone, or a room that never quite warms up despite supposedly being insulated already. If the last installer glued foil-backed foam board straight onto the stone, with no lime plaster or hemp behind it, get it looked at before the damage spreads. We survey what is there before we touch anything, and we tell you plainly if the existing work needs to come out rather than just adding to it.
Vapour-open is the technical term for a build-up (lime, hemp and wood wool) that lets moisture pass through and escape rather than sealing it in, which is what most people mean when they say breathable. It is the appropriate approach for solid stone and sandstone walls, and it needs no conventional plastic vapour barrier. We tend to say vapour-open, because it is the more accurate term.
External insulation is usually unacceptable on a sandstone frontage and in conservation areas, so internal vapour-open insulation is normally the route. We will confirm what is feasible for your property.
It depends on the system and on what we find when the old lath and plaster comes off. Plan on roughly 120mm per insulated wall, and we confirm the figure room by room at survey.
It depends on your household’s circumstances. The Home Energy Scotland grant covers up to 75% of the cost of solid wall insulation, capped at £7,500, with an optional interest-free loan of up to £2,500 on top. That £7,500 limit on wall work is the same in Hamilton as in every other postcode. A TrustMark-registered installer is required to access the funding, which we are. Home Energy Scotland administers the application and decides eligibility, not us. We answer their questions and send the installer paperwork they ask for.
Check your eligibility with Home Energy Scotland, then book the survey so your application has a written price behind it.
Book Your Free Survey ↓More than people expect, because the board coming off is the easy part. Glued-on foam board usually has to be prised off the stone in sections. Any moisture trapped behind it then needs time to dry out, sometimes with a dehumidifier running for a few weeks, before anything goes back. Any timber built into the wall, like joist ends or lintels, gets checked for rot while the wall is open, because that is exactly where trapped moisture does its worst work. Once the wall is dry and sound, the proper layers go on: a thin lime coat on the stone, IndiTherm hemp, wood wool board and lime plaster. It is a slower start than a first-time job, and we build that into the programme and the price rather than pretending the strip-out is free.
Across the whole county, first-time installs and remedial work alike. Solid sandstone behaves the same in Larkhall, Strathaven or Lanark as it does here in Hamilton, and every job runs from our East Kilbride base. The wall in front of us on the day decides the job. It might be bare stone, a later rendered brick extension that may suit a moisture barrier, or somebody else’s failed board that has to come off before anything new goes on. The same reasoning behind heritage wall insulation across Glasgow’s Southside applies just as directly here.
Book Your Free Survey.
Tell us about your property and we will be in touch to arrange a survey.
Would rather talk it through first? Call us 0141 465 5812.



