Internal Wall Insulation in Irvine for Older Stone and Harled Houses
All six of our installers do heritage work, so whoever fits your Irvine internal wall insulation knows how harled stone needs to dry.
Survey and installation
-
Stripped to the stone
-
A lime parge
-
Hemp in the frame
-
Wood-wool board
-
Lime plaster with mesh
-
Finished and painted
Illustration: a vapour-open system on a stone wall
-
Stripped to the stone
-
A lime parge
-
Hemp in the frame
-
Wood-wool board
-
Lime plaster with mesh
-
Finished and painted
Solid Wall Insulation in Irvine: The Damp Risk on Harled Walls
Maybe the gable room never warms up, or a damp patch keeps coming back.
-
Before you pay for internal wall insulation in Irvine, you want to know it won’t make that damp worse.
-
Harl is a rough render thrown onto the outside of the stone, and you’ll find it on some older Irvine houses.
-
Original lime harl lets the wall dry out, but cement patches from later repairs slow that drying down.
-
Some installers fix foil-backed plastic foam board to the inside of that wall. With cement outside and foam inside, rain that gets into the stone can barely dry out.
-
Indoors you see it as lifting paint or softening timber.
-
Poorly fitted wall insulation is a known problem.
The National Audit Office’s October 2025 report covered the ECO4 and GBIS schemes.
It put major defects at around 29% of internal and 98% of external wall insulation jobs, in more than 30,000 homes.
That worry is where we start.
We check what each wall and its harl are made of before we quote.
Then we fit a lime, hemp and wood wool lining that lets damp escape (a vapour-open system), the same internal wall insulation for harled stone we fit across Ayrshire.
Warmth stays in the gable room, and the stone behind it keeps drying out.
Our process
From Survey to Finish: Internal Wall Insulation in Irvine
We start with a free survey of your walls, and you see the two systems we fit before anyone strips a wall.
-
Step 1
Free survey and tailored design
Calum or Lewis, our surveyor, checks every outside wall from inside and out. They note what its outer coat is made of and any signs of old damp. You get a written quote after the visit, with each option priced side by side.
-
Step 2: the split
The honest comparison
Your wall’s material, finish and modelling decide which of these two systems suits it.
-
Right for most stone
Natural system that lets stone dry
Lime + hemp or wood wool
Illustration: vapour from the room passes through each layer and the stone keeps drying. - + The wall keeps drying out
- + Can mostly be taken out again later, and keeps the stone healthy
- + Right for most solid sandstone walls
- − Costs more and takes longer to prepare and fit
- − Thicker, so you lose a little more room
-
On the right wall
Membrane system that keeps room moisture out
Pro Clima membrane + insulation
Illustration: the membrane holds vapour from the room back, before it reaches the wall. - + For brick that soaks up little water, or brick that is rendered or painted
- + Can be thinner in some cases
- − Only used where our moisture modelling shows it is safe
- − Wrong for a normal sandstone wall, which soaks up water
-
-
Step 3
Specialist installation
Our installers strip the walls back to stone and build the frame. Our lime plasterer puts on the lime coats, and each coat dries before the next goes on, so this stage takes weeks.
-
Step 4
Aftercare and guarantee
We’ll tell you which paints still let the stone dry out when you come to redecorate. The job also carries our 25-year workmanship guarantee.
-
Where we say no
What we will not do
Foam board glued onto sandstone
We won’t glue a sealed polystyrene or foam board onto a solid sandstone wall to bring the price down. If that is the only way to a cheaper quote, we will tell you so and advise against it.
Next step
Start with the survey
Find out what your harl is made of before anything goes on the inside.
If a damp patch keeps coming back, show us where, and the survey checks the harl on that wall first.
Book Your Free Survey ↓
Inside the wall
Your wall, insulated layer by layer
Each card shows one build going onto a wall, from bare masonry to a finished room, in the order our fitters work. The pictures are illustrations.
Illustration: heritage system
-
Stripped to the stone
Our fitters strip the old plaster and timber laths back to bare sandstone, so no hidden wood is left to rot. Cornicing on these walls comes down too, and is remade in lime after the insulation goes in.
-
A lime parge
Then a coat of lime, called a parge, goes over the stone. It fills the hollows where damp air could sit and turn to water.
-
Hemp in the frame
Our fitters press two 50mm layers of Scottish-made IndiTherm hemp into a 45mm timber frame fixed over the lime. This is the layer that keeps the heat in your room.
-
Wood-wool board
Wood-wool board, a stiff sheet of bound wood shavings, goes over the hemp next. It gives the lime plaster a solid face to grip and still lets moisture pass through.
-
Lime plaster with mesh
Lime plaster goes on next, with a mesh bedded into it.
-
Finished and painted
A smooth lime finish leaves the wall about 120mm further into the room than before. At handover you get paint guidance, so the finish keeps letting the wall dry.
Hemp, wood wool and lime on bare sandstone
This vapour-open build suits most solid sandstone walls. Each layer lets moisture pass, so the stone behind it can keep drying out.
Illustration: membrane system
-
Stripped back to brick
The old plaster comes off the inside of the wall, back to the brick.
-
Hemp packed into a frame
Our fitters pack hemp insulation into a timber frame fixed over the brick.
-
The Intello Plus membrane
A Pro Clima Intello Plus membrane goes across the frame to keep room moisture out of the wall.
-
Plasterboard and skim
Plasterboard goes over the membrane, and a skim coat finishes the wall.
Hemp and a membrane for the right brick wall
Some walls are brick, and where that brick is rendered or takes up little water, a sealed build can suit it better.
It finishes in plasterboard and a skim coat, so it goes in faster than the lime build.
At your survey, Calum or Lewis checks each outside wall, and Calum tells you which build each one suits.
Why Irvine Homeowners Pick Us for Internal Wall Insulation
Insulation planned around how your Irvine walls take in damp and dry out.
-
We find out what the harl is made of
The survey checks each wall’s harl and pointing (the mortar between the stones) for lime or cement. Your quote then prices each wall on its own.
-
Scottish hemp with lime on both sides
Your stone gets a thin lime coat first. IndiNature’s IndiTherm hemp sits in a timber frame over it, covered by wood wool board and a lime plaster finish.
-
Hemp and lime, because they suit stone
They cost more and take longer to fit than foam board, and they let the stone behind them keep drying.
-
Each wall matched to a tested design
We keep a library of wall designs for Scottish stone, each checked on a computer model of how water travels through the wall. Your quote says which design fits each wall and why.
-
Cornicing taken down and made again
On the walls we insulate, cornicing is recreated in lime to the old shape, and at the survey we agree exactly who does that work. Allow about 120mm off the room on each wall we line, within a range of 105mm to 125mm.
-
Your questions go to the designer
Calum leads the design on our heritage jobs and signs off your quote, so you talk to the person who decides what goes on your walls.
The honest bit: period features
Cornicing, shutters and panelling on the walls we insulate have to come off, and they can’t be saved. Cornicing on walls we don’t line stays. The plaster mouldings are recreated in lime once the insulation is in, and at the survey we agree exactly who does that work, and who remakes the woodwork.
Internal Wall Insulation Grant in Irvine: Up to £7,500 Towards the Cost
A typical heritage wall job costs £14,000 to £25,000, within a full range of £10,000 to £50,000.
We cover Ayrshire from East Kilbride, including internal wall insulation in Kilmarnock on the inland side of the county.
- GrantUp to 75%, if you qualify
- Walls cap£7,500 in any postcode
- LoanOptional, interest-free, up to £2,500
- InstallerTrustMark-registered
If you qualify for the full £7,500 grant, you’d pay roughly £6,500 on the smaller job and £17,500 on the larger one.
- Wall insulation grants in Irvine are run by Home Energy Scotland. The grant covers up to 75% of the cost of solid wall insulation, with a £7,500 cap. Wall work stays at that cap whatever your postcode.
- Home Energy Scotland also offers an optional interest-free loan, capped at £2,500 for solid wall work.
- Floors are a separate measure with their own £1,500 grant cap, and in most postcodes walls and floors share one £7,500 total.
- If your floors need doing too, mention them when you book, because walls and floors draw on one grant total.
- Home Energy Scotland takes your application and decides whether you qualify, and the grant only pays out through a TrustMark-registered installer, which we are.
A rural or island postcode raises that shared total to £9,000, which only helps when floors or a loft go in with the walls, and we fit underfloor insulation in Irvine as well.
Rated 5.0 on Google by homeowners across central Scotland.
Solid stone walls need to dry out, and foam board stops them.
-
1Bare solid stone
Old solid stone walls handle damp the way they always have: they soak it up, then let it dry off both the inside and the outside. They have no cavity and no plastic layer, and that works for as long as the wall can keep drying.
-
2Foil-faced foam board
Foil-backed plastic foam board or sealed foam stuck straight onto the inside of the wall stops that drying. Warm, moist air from your rooms still reaches the cold stone behind it, turns to water and has nowhere to go. That trapped water causes the damp people blame on insulation.
-
3Vapour-open build-up
Our system uses lime, hemp and wood wool, which let that moisture pass through and dry off (the trade calls this vapour-open). When we plan the layers for your wall, it stays warm and keeps drying.
Internal wall insulation in Irvine, with the damp risk checked first.
Our designs come from WUFI modelling, computer software that tracks how heat and damp move through the wall layers over several years. A solid wall needs that long to settle to a steady moisture level: roughly five years for brick and ten for stone.
-
About 5 yearsbrick, drying to equilibrium
-
About 10 yearsstone, drying to equilibrium
For a typical stone wall, we use a set of layers we have already modelled. So we can show you the damp risk for a wall like yours as a figure on paper.
Ask your own questions about internal wall insulation in Irvine.
Call us, tell us which rooms in your Irvine house stay coldest, and we will look at those walls first at the survey.
Ballagan Farm, Strathblane
A two-storey farmhouse under full renovation, where poor insulation had left the walls damp. We stripped the walls back to bare stone and gave them a thin coat of lime. Then we fitted IndiTherm hemp and wood-wool boards and finished the sloping ceilings and the solid sandstone walls in lime plaster. We insulated the loft with Knauf Earthwool 44.
Auchinlay House, Dunblane
An internal wall and room-in-roof project for a homeowner getting ready for a heat pump, who wanted the bedrooms comfortable all year. On the walls we used hemp, wood-wool board and lime plaster, which let the wall dry. The sloping ceilings and dormers got a sealed system of PIR foam board and Superfoil SF19+, and the upper loft got Knauf Earthwool.
Mount Hope, Bridge of Allan
The client was renovating an old sandstone wing of their period home. We fitted 100mm Sisalwool, wood-wool board and lime plaster on four walls, which lets the stone dry. On one large gable wall we took out the dropped ceiling and built an insulated vaulted ceiling in its place.
Belhaven Terrace Lane, Glasgow
A West End owner wanted the whole house warmer. We insulated the ground-floor walls from the inside and the upstairs bedrooms in the roof space. The stone walls got layers that let them dry, because this sandstone soaks up a lot of water. In the sloping ceilings, a sealed layer stops warm, moist air reaching the roof spaces.
Observatory Lane, Glasgow
Internal wall insulation for a client of Oscar J Murray Architects, part of a whole-house renovation in Glasgow’s West End. We fitted IndiTherm hemp on the stone walls, dormers and sloping ceilings, and finished the walls in lime plaster. A Pro Clima Intello membrane went on the sloping ceilings, and Contega Solido tape seals the gaps round the windows.
Protected, and built to the standard the grant requires.
Our workmanship is guaranteed for 25 years. If our workmanship fails, we come back and put it right. We take no deposit, so nothing is paid up front. Payment is on 7-day terms: you are invoiced after completion, once you have seen the finished work and the photographs, and pay within seven days.
-
25-year workmanship guarantee
We guarantee our workmanship on your walls for 25 years.
-
TrustMark and PAS 2030 certified
Audited to the standards the grant requires.
-
No deposit
You pay nothing until the job is finished.
-
Payment on 7-day terms
Your invoice arrives when the work is done, with seven days to pay it.
Irvine Homeowners Ask About Internal Wall Insulation
Straight answers on cost, grants, systems and coverage area.
It shouldn’t, as long as every layer lets moisture through. Damp problems tend to start when foil-backed foam board seals the inside face of a solid wall and cuts off how stone walls handle moisture.
Calum or Lewis checks for existing damp on the survey visit, so point out any patches you have noticed.
Book Your Free Survey ↓Expect £14,000 to £25,000 before the grant for a typical heritage job. The price depends on how many outside walls you treat and what sits on them, such as windows, radiators and kitchen units. One gable wall costs far less than a detached house done on three sides.
Each option in the quote comes with its own price and the honest case for it.
Book Your Free Survey ↓You can apply through Home Energy Scotland, which assesses each application and decides whether your postcode counts as rural or island. That raises the cap for the whole property to £9,000, but wall work on its own still stops at £7,500. Your written quote gives the details the application asks for.
Check your eligibility with Home Energy Scotland, then book the survey so your application has a written price behind it.
Book Your Free Survey ↓Yes, as a rule, because conservation-area rules cover the outside of a building and this work happens indoors. North Ayrshire Council can confirm for your street. A listed building can need consent for inside changes.
Have any earlier consent papers or council letters to hand on the survey day, so we can plan the paperwork around them.
Book Your Free Survey ↓No, whether the harl is lime or cement, and the survey checks which you have. Harled stone takes the same lime and hemp lining as bare stone. Cement harl slows the drying and can crack and let rain in, so we’d flag any outside repair first.
Yes, one room or one wall is a normal job. The survey checks where it meets walls we aren’t insulating, because those joins need extra care to stop condensation. Doing two rooms in one visit tends to cost less than booking them as two separate jobs.
Book Your Free Survey.
Tell us about your property and we will be in touch to arrange a survey.



