Internal Wall Insulation in Kilmarnock: What John Finnie Street Proves About Red Sandstone
Calum or Lewis, our surveyor, carries out the survey, and we photograph every layer before plastering. TrustMark, PAS 2030 accredited, rated 5.0 on Google.
Top-floor tenement, conservation area
-
Stripped to the stone
-
A lime parge
-
Hemp in the frame
-
Wood-wool board
-
Lime plaster with mesh
-
Finished and painted
Illustration: a vapour-open system on a stone wall
-
Stripped to the stone
-
A lime parge
-
Hemp in the frame
-
Wood-wool board
-
Lime plaster with mesh
-
Finished and painted
Solid Wall Insulation in Kilmarnock: The Town Centre Got Lime, the Villas Get Quoted Foil Board
Cold rooms in a red sandstone house push you towards insulation, and the first quote you get in Kilmarnock may be for foam board stuck straight onto the stone.
-
That wall has no cavity and dries only through its lime and plaster, so a sealed board traps the damp inside it.
-
The grant-aided repairs to the red sandstone on John Finnie Street, in the town centre, used stone and lime.
The National Audit Office found that around 98% of external and 29% of internal wall insulation fitted under ECO4 and GBIS to mid-January 2025 had major defects, across 30,000-plus homes.
The common factor was generic specification, chosen before anyone read the wall.
Your walls get the same stone-and-lime rule the town centre repairs followed. Insulating sandstone walls properly means every layer keeps passing vapour: lime, then hemp, then wood wool, the same internal wall insulation for red sandstone we fit across East Ayrshire.
Catch the house mid-renovation, with old lining already off, and the work costs less and tells you more: bare stone shows salting and old patch repairs that paint hides.
Many Kilmarnock homes are post-war houses with cavity walls, and if you own one of those, we will quote cavity wall filling instead.
Your red sandstone keeps drying as it always has, and the rooms inside it finally stay warm.
Our process
Our Simple Process for Internal Wall Insulation in Kilmarnock
We start with a free survey of your walls, and you see the two systems we fit before anyone strips a wall.
-
Step 1
Free survey and tailored design
Calum or Lewis, our surveyor, walks the house wall by wall, checking how each is built, what covers it, how exposed it is and any damp already showing. Each wall gets a build-up from the validated library, and the quote comes back in writing with the reasoning attached.
-
Step 2: the split
The honest comparison
Your wall’s material, finish and modelling decide which of these two systems suits it.
-
Right for most stone
Vapour-open heritage system
Lime + hemp or wood wool
Illustration: vapour from the room passes through each layer and the stone keeps drying. - + Vapour-permeable, the wall keeps drying
- + Largely reversible, and protects the fabric
- + Right for most solid sandstone walls
- − Costs more, takes longer, more prep
- − Slightly more room lost to depth
-
On the right wall
Vapour-controlled system
Pro Clima membrane + insulation
Illustration: the membrane holds vapour from the room back, before it reaches the wall. - + For low-absorption or rendered / painted brick
- + Can be thinner in some cases
- − Only correct where modelling supports it
- − Wrong on a typical absorbent sandstone wall
-
-
Step 3
Specialist installation
Strip-back, framing and insulation are our own installers’ work. The parge and lime finish belong to our specialist plasterer. Lime cures at its own pace between coats, so a heritage wall runs longer than a plasterboard job would, often phased room by room, and the programme is honest about that from the first conversation.
-
Step 4
Aftercare and guarantee
The finished work is photographed and documented, and it carries our 25-year workmanship guarantee.
-
Our line in the sand
What we will not do
Sealed foam on solid sandstone
We won’t glue a sealed polystyrene or foam board onto a solid sandstone wall to hit a budget. If that’s what it would take to land a cheaper number, we’ll tell you honestly and recommend against it.
Next step
Start with the survey
Have your sandstone read properly before any foam board goes near it.
Ask about cornicing, salt marks and the grant while we are there, and you get the answers face to face, in your own rooms. You get the answers face to face, in your own rooms.
Book Your Free Survey ↓
Inside the wall
Your wall, insulated layer by layer
Each card shows one build going onto a wall, from bare masonry to a finished room, in the order our fitters work. The pictures are illustrations.
Illustration: heritage system
-
Stripped to the stone
Our fitters strip the old plaster and timber laths back to bare sandstone, so no hidden wood is left to rot. Cornicing on these walls comes down too, and is remade in lime after the insulation goes in.
-
A lime parge
Then a coat of lime, called a parge, goes over the stone. It fills the hollows where damp air could sit and turn to water.
-
Hemp in the frame
Our fitters press two 50mm layers of Scottish-made IndiTherm hemp into a 45mm timber frame fixed over the lime. This is the layer that keeps the heat in your room.
-
Wood-wool board
Wood-wool board, a stiff sheet of bound wood shavings, goes over the hemp next. It gives the lime plaster a solid face to grip and still lets moisture pass through.
-
Lime plaster with mesh
Lime plaster goes on next, with a mesh bedded into it.
-
Finished and painted
A smooth lime finish leaves the wall about 120mm further into the room than before. At handover you get paint guidance, so the finish keeps letting the wall dry.
Hemp, wood wool and lime on bare sandstone
This vapour-open build suits most solid sandstone walls. Each layer lets moisture pass, so the stone behind it can keep drying out.
Illustration: membrane system
-
Stripped back to brick
The old plaster comes off the inside of the wall, back to the brick.
-
Hemp packed into a frame
Our fitters pack hemp insulation into a timber frame fixed over the brick.
-
The Intello Plus membrane
A Pro Clima Intello Plus membrane goes across the frame to keep room moisture out of the wall.
-
Plasterboard and skim
Plasterboard goes over the membrane, and a skim coat finishes the wall.
Hemp and a membrane for the right brick wall
Some walls are brick, and where that brick is rendered or takes up little water, a sealed build can suit it better.
It finishes in plasterboard and a skim coat, so it goes in faster than the lime build.
At your survey, Calum or Lewis checks each outside wall, and Calum tells you which build each one suits.
Why Kilmarnock Homeowners Choose Us for Internal Wall Insulation
We design every build-up for your own wall.
-
Same logic as the town centre repairs
The grant-aided repairs on John Finnie Street went in as stone and lime, because a repair has to keep moving moisture. We apply the same rule.
-
Stripped to stone, then lime parged
Two layers of 50mm IndiTherm hemp, made in Scotland, in a 45mm timber frame, then wood wool board and two-coat lime plaster.
-
No two sandstone walls match
Your build-up comes from a library of moisture models validated for Scottish wall types, because one label, “Kilmarnock red sandstone”, covers walls that behave differently. We tell you which design your wall was matched to.
-
Where membranes belong
Some walls suit hemp behind a Pro Clima Intello Plus membrane instead. That route suits later brick, and original stone stays vapour-open. Both routes are priced with the drawbacks written down.
-
Cornice matching
Cornicing comes down through the strip-back. It is recreated in lime once the insulation is in, matched to your profile, with no standard pattern across Kilmarnock’s villas. At the survey we agree exactly who does that work.
-
Three job types
Calum or Lewis, our surveyor, sees every job first, whether it is a villa, a Bonnyton tenement or a flat above a John Finnie Street shop. Installers are ours, heritage-trained, with photographs of every layer.
The honest bit: period features
Existing cornicing, shutters and panelling on the Kilmarnock walls we treat must come down and cannot be saved. The cornice and mouldings are recreated in lime once the wall is finished. At the survey we agree exactly who does that work, and who remakes the shutters and panelling.
Internal Wall Insulation Cost in Kilmarnock, and What the Grant Covers
The price often turns on old cement or plasterboard from an earlier refit, which has to come off before the stone can dry.
We fit wall insulation across East Ayrshire, from Kilmaurs to Galston, Newmilns and Darvel, and internal wall insulation in Ayr as well.
- GrantUp to 75%, if you qualify
- Walls cap£7,500 in any postcode
- LoanOptional, interest-free, up to £2,500
- InstallerTrustMark-registered
For a stone house in Kilmarnock, heritage internal wall insulation costs £10,000 to £50,000, and most jobs sit at £14,000 to £25,000. If you qualify, the grant tops out at £7,500, which leaves £6,500 to £17,500 to pay.
- Home Energy Scotland covers up to 75% of the cost, and wall work gets no more than £7,500 at any address.
Rural and island homes get a £9,000 cap for the whole house, which only helps when a loft or floor goes in alongside the walls.
- Funding needs a TrustMark-registered installer, and Home Energy Scotland decides who qualifies.
- An optional interest-free loan of up to £2,500 can sit on top.
Why vapour-open, and why it matters for Scottish stone.
-
1Bare solid stone
Solid sandstone and rubble-stone walls manage water the way they always have: they absorb it and let it evaporate off both faces. They have no cavity, membrane or plastic layer. That works indefinitely, as long as the wall can keep drying.
-
2Foil-faced foam board
Foil-faced plastic foam board (PIR) or closed-cell foam glued straight onto the inside of the wall breaks that. It creates a cold, sealed layer where warm internal moisture reaches the stone, condenses, and has nowhere to go. That trapped condensation is the actual mechanism behind the damp people blame on insulation.
-
3Vapour-open build-up
A vapour-open system (lime, hemp, wood wool) lets that vapour pass through instead. With the right design, the wall stays warm and keeps drying. Whether someone designed the build-up to let the wall breathe matters far more than the brand of insulation.
Calculated, not guessed.
Our designs are built on WUFI modelling, simulating heat and moisture moving through a build-up over several years, the time a solid Kilmarnock wall actually needs to dry to equilibrium: roughly five years for brick, ten for stone.
-
About 5 yearsbrick, drying to equilibrium
-
About 10 yearsstone, drying to equilibrium
A standard Kilmarnock stone wall is matched to a build-up we have already modelled. So before any work starts, we can show you the modelled moisture result for a wall like yours.
Bring your own questions about internal wall insulation in Kilmarnock.
Real Clients, Real Results
Ballagan Farm in Strathblane is a two-storey farmhouse with solid sandstone walls that were damp and poorly insulated when the owners began a full renovation.
We stripped the walls back to the stone, parged them in lime, fitted IndiTherm hemp and wood wool boards, and finished in lime plaster, on the sloping ceilings as well as the walls. The loft got Knauf Earthwool 44 in the same job. The survey confirms whether a red sandstone wall in Kilmarnock suits the same build-up. We photograph every layer of your Kilmarnock job as it goes on, so you can see what sits behind the new plaster.
Protected, and built to the standard the grant requires.
Our workmanship is guaranteed for 25 years. We take no deposit, and payment is due on 7-day terms after the work is complete and you have seen it. If a company asks for thousands up front, ask them why.
-
25-year workmanship guarantee
Given to you in writing.
-
No deposit, pay after completion
No deposit, and payment is due within 7 days of completion.
-
TrustMark and PAS 2030 certified
Audited to the standards the grant requires, with every design led by Calum.
-
Our own employed fitters
No agency labour and honest advice. We turn down work that is not right for the wall.
Internal Wall Insulation Questions From Kilmarnock and East Ayrshire
Straight answers on cost, damp, room loss, grants and conservation areas.
Not when the build-up matches the wall. Damp comes from vapour-closed boards sealed onto absorbent stone, trapping moisture the wall used to manage itself. Kilmarnock proved the opposite: nobody repairing the John Finnie Street frontages sealed the stone. Our system follows the same rule: lime parge, hemp, wood wool board, lime plaster, every layer passing vapour, so the answer to whether internal wall insulation causes damp in your house comes down to that design.
Calum or Lewis checks for existing damp on the survey visit, so point out any patches you have noticed.
Book Your Free Survey ↓The honest range is £10,000 to £50,000, with most completed jobs between £14,000 and £25,000. Take off the full £7,500 grant, if you qualify, and £6,500 to £17,500 is yours to pay. What moves a Kilmarnock quote is the wall’s history: how much old lining and skim has to come off, how much cornicing comes down. Calum prices each wall from what the survey finds.
Each option in the quote comes with its own price and the honest case for it.
Book Your Free Survey ↓Solid wall insulation is an eligible measure, and each application still needs approval. Home Energy Scotland covers up to 75%, capped at £7,500 for the walls in any postcode. A rural or island address raises the limit for the whole property to £9,000, and that extra £1,500 only counts if another measure, such as a loft, is added. An optional interest-free loan sits on top of the grant, up to £2,500 on a solid wall measure. Funding only moves through a TrustMark-registered installer, which we are. Home Energy Scotland decides eligibility, and we answer their questions.
Check your eligibility with Home Energy Scotland, then book the survey so your application has a written price behind it.
Book Your Free Survey ↓No, on treated walls. Anyone promising otherwise plans to board over it or break it. The run comes down before the strip-back, and it is recreated in lime to match once the wall is finished. At the survey we agree exactly who does that work. Matching is real work here: Kilmarnock’s villa streets carry classical, Italianate, castellated and multi-gabled houses, no two cornices the same. Internal walls stay untouched, and each room’s exact loss is measured at survey.
Generally no, because nothing visible from the street changes. The conservation area around John Finnie Street and Bank Street protects the outside of the buildings, and internal wall insulation never touches it. A listed building is the exception, because listed building consent can cover internal work too. East Ayrshire Council can confirm your building’s status, and we flag anything relevant at survey.
Have any earlier consent papers or council letters to hand on the survey day, so we can plan the paperwork around them.
Book Your Free Survey ↓For bare solid sandstone, yes: lime parge, IndiTherm hemp, wood wool board, lime plaster, every layer passing vapour, which is what vapour-open internal wall insulation means. The vapour-controlled alternative, hemp behind a Pro Clima Intello Plus membrane, suits low-absorption fabric like brick additions. A subdivided flat can need both, settled wall by wall at survey.
Yes. The survey works identically across East Ayrshire: Kilmaurs, Crosshouse, Hurlford, and along the valley through Galston, Newmilns and Darvel. Village cores often carry more genuinely solid stone than streets built up since, so the wall-by-wall check matters even more. Home Energy Scotland decides whether an address counts as rural, and that only matters when a loft or floor goes in with the walls.
A vapour-open system protects the fabric and improves the EPC, both of which support the value of a period Kilmarnock home. We will give you a straight view of payback for your situation.
Book Your Free Survey.
Tell us about your property and we will be in touch to arrange a survey.
Prefer to talk it through first? Call us on 0141 465 5812.



