Internal Wall Insulation in Morningside: Warmer Bay Rooms in Stone Flats and Villas
Google review
-
Stripped to the stone
-
A lime parge
-
Hemp in the frame
-
Wood-wool board
-
Lime plaster with mesh
-
Finished and painted
Illustration: a vapour-open system on a stone wall
-
Stripped to the stone
-
A lime parge
-
Hemp in the frame
-
Wood-wool board
-
Lime plaster with mesh
-
Finished and painted
Lining Morningside’s Sandstone Walls Without Trapping Damp
In plenty of Morningside flats and villas, the coldest room has the bay window, the shutters and the best cornice.
-
Internal wall insulation in Morningside can warm it.
-
You’ll want two answers before anyone touches that wall.
-
Will the stone stay dry, and what happens to the plasterwork?
-
The tenements on Morningside Road and the houses behind them are built of solid sandstone, and there’s no cavity to fill.
-
Rain gets a little way into the stone and dries out again through the lime and the outside face.
-
A lining has to leave that drying alone.
-
Glue foil-backed plastic foam board over the stone and that drying stops.
-
Damp then gathers behind the board, out of sight, until the paint blisters or the ends of the floor joists, which sit in the wall, start to rot.
Linings like that went wrong on a large scale under ECO4 and GBIS.
National Audit Office figures show major defects in around 29% of internal and 98% of external wall insulation jobs, across more than 30,000 homes.
A lining moves the face of the wall about 120mm into the room, and the cornices on that wall come down.
They are recreated in lime once the insulation is in, and at the survey we agree exactly who does that work.
The internal wall insulation we fit on solid stone begins with a thin lime coat straight onto the bare sandstone. Hemp goes into a timber frame over it, then wood wool board and two coats of lime plaster.
Builders call this vapour-open, because damp can still pass out through every layer.
Our process
Internal Wall Insulation in Morningside, Wall by Wall: Our Process
We start with a free survey of your walls, and you see the two systems we fit before anyone strips a wall.
-
Step 1
Free Survey and Tailored Design
At the free survey, Calum or Lewis goes round every outside wall, inside and out, and notes any damp. Your written quote lists each option with its cost and its downsides.
-
Step 2: the split
The honest comparison
Your wall’s material, finish and modelling decide which of these two systems suits it.
-
Right for most stone
Natural system that lets stone dry
Lime + hemp or wood wool
Illustration: vapour from the room passes through each layer and the stone keeps drying. - + The wall keeps drying out
- + Can mostly be taken out again later, and keeps the stone healthy
- + Right for most solid sandstone walls
- − Costs more and takes longer to prepare and fit
- − Thicker, so you lose a little more room
-
On the right wall
Membrane system that keeps room moisture out
Pro Clima membrane + insulation
Illustration: the membrane holds vapour from the room back, before it reaches the wall. - + For brick that soaks up little water, or brick that is rendered or painted
- + Can be thinner in some cases
- − Only used where our moisture modelling shows it is safe
- − Wrong for a normal sandstone wall, which soaks up water
-
-
Step 3
Specialist Installation
We strip the old plaster to bare stone before our lime plasterer lays a thin first coat. A timber frame packed with hemp, wood wool board and two lime coats go on after, with drying time between each.
-
Step 4
Aftercare and Guarantee
At handover we give you photos of the hidden layers, a note on paints that suit lime and the 25-year workmanship guarantee, written down.
-
Where we say no
What we will not do
Foam board glued onto sandstone
We won’t glue a sealed polystyrene or foam board onto a solid sandstone wall to bring the price down. If that is the only way to a cheaper quote, we will tell you so and advise against it.
Inside the wall
Your wall, insulated layer by layer
Each card shows one build going onto a wall, from bare masonry to a finished room, in the order our fitters work. The pictures are illustrations.
Illustration: heritage system
-
Stripped to the stone
Our fitters strip the old plaster and timber laths back to bare sandstone, so no hidden wood is left to rot. Cornicing on these walls comes down too, and is remade in lime after the insulation goes in.
-
A lime parge
Then a coat of lime, called a parge, goes over the stone. It fills the hollows where damp air could sit and turn to water.
-
Hemp in the frame
Our fitters press two 50mm layers of Scottish-made IndiTherm hemp into a 45mm timber frame fixed over the lime. This is the layer that keeps the heat in your room.
-
Wood-wool board
Wood-wool board, a stiff sheet of bound wood shavings, goes over the hemp next. It gives the lime plaster a solid face to grip and still lets moisture pass through.
-
Lime plaster with mesh
Lime plaster goes on next, with a mesh bedded into it.
-
Finished and painted
A smooth lime finish leaves the wall about 120mm further into the room than before. At handover you get paint guidance, so the finish keeps letting the wall dry.
Hemp, wood wool and lime on bare sandstone
This vapour-open build suits most solid sandstone walls. Each layer lets moisture pass, so the stone behind it can keep drying out.
Illustration: membrane system
-
Stripped back to brick
The old plaster comes off the inside of the wall, back to the brick.
-
Hemp packed into a frame
Our fitters pack hemp insulation into a timber frame fixed over the brick.
-
The Intello Plus membrane
A Pro Clima Intello Plus membrane goes across the frame to keep room moisture out of the wall.
-
Plasterboard and skim
Plasterboard goes over the membrane, and a skim coat finishes the wall.
Hemp and a membrane for the right brick wall
Some walls are brick, and where that brick is rendered or takes up little water, a sealed build can suit it better.
It finishes in plasterboard and a skim coat, so it goes in faster than the lime build.
At your survey, Calum or Lewis checks each outside wall, and Calum tells you which build each one suits.
Why Morningside Flat and Villa Owners Choose Us
Insulation planned around how your Morningside walls take in damp and dry out.
-
Each outside wall checked before it gets a price
Front, back and gable walls are often built or finished differently. Calum or Lewis, our surveyor, looks at the stone, its pointing and any outside render or paint wall by wall.
-
A tested layer design for your wall type
We match your wall to a library of layer designs for Scottish walls, and every one of them has already been run through WUFI moisture software before it reaches a quote.
-
A straight answer for brick and rendered walls
Hemp and lime suit most sandstone. Brick that soaks up little water can suit a lining with a Pro Clima membrane instead, and your quote names the lining for each wall along with its drawbacks.
-
We earn less on hemp and fit it anyway
Foam board would cost us less to buy. Hemp takes a bite out of our margin on every stone wall, and we still choose it because sandstone needs to dry.
-
Visits booked in from East Kilbride
Morningside is about an hour from our base, so surveys are booked in ahead and the crew travels through for each stage, with lime drying time built into the dates.
-
TrustMark registration for the grant
The grant for solid wall insulation only goes to homes where a TrustMark-registered installer does the work. Our company is registered and holds PAS 2030 accreditation.
The honest bit: period features
Cornicing, shutters and panelling on the walls we insulate have to come off, and they can’t be saved. Cornicing on walls we don’t line stays. Once the insulation is in, our specialist lime plasterer remakes the plaster mouldings and our joiner remakes the woodwork.
Internal Wall Insulation Costs in Morningside and the £7,500 Grant
Lining sandstone walls costs £10,000 to £50,000, and the usual job falls between £14,000 and £25,000.
A flat with one cold gable wall needs far less work than a villa with four outside walls, and what internal wall insulation costs also depends on what lies behind the old plaster.
- GrantUp to 75%, if you qualify
- Walls cap£7,500 in any postcode
- LoanOptional, interest-free, up to £2,500
Where the full £7,500 is awarded, the bill on a £14,000 job falls to about £6,500, and on a £25,000 job to about £17,500.
- If your household qualifies, Home Energy Scotland’s grant covers up to 75% of the cost of lining solid walls, with a £7,500 ceiling.
Wall work can’t get more than £7,500 from the grant in any postcode. Home Energy Scotland also offers an interest-free loan for solid wall insulation, capped at £2,500.
- The application belongs to Home Energy Scotland, which also decides who qualifies. We help by answering your questions and sending the installer paperwork it needs.
Rated 5.0 on Google by homeowners across central Scotland.
Solid stone walls need to dry out, and foam board stops them.
-
1Bare solid stone
Old solid stone walls handle damp the way they always have: they soak it up, then let it dry off both the inside and the outside. They have no cavity and no plastic layer, and that works for as long as the wall can keep drying.
-
2Foil-faced foam board
Foil-backed plastic foam board or sealed foam stuck straight onto the inside of the wall stops that drying. Warm, moist air from your rooms still reaches the cold stone behind it, turns to water and has nowhere to go. That trapped water causes the damp people blame on insulation.
-
3Vapour-open build-up
Our system uses lime, hemp and wood wool, which let that moisture pass through and dry off (the trade calls this vapour-open). When we plan the layers for your wall, it stays warm and keeps drying.
Internal wall insulation in Morningside, with the damp risk checked first.
Our designs come from WUFI modelling, computer software that tracks how heat and damp move through the wall layers over several years. A solid wall needs that long to settle to a steady moisture level: roughly five years for brick and ten for stone.
-
About 5 yearsbrick, drying to equilibrium
-
About 10 yearsstone, drying to equilibrium
For a typical stone wall, we use a set of layers we have already modelled. We model a larger, listed or unusual building from scratch, and quote that as a separate service. Either way, we can show you the damp risk as a figure on paper.
Ask your own questions about internal wall insulation in Morningside.
Ring Calum, name the rooms that feel coldest and tell him if your flat sits on a gable end. He’ll explain what the free survey looks at before you book a date.
Ballagan Farm, Strathblane
A two-storey farmhouse under full renovation, where poor insulation had left the walls damp. We stripped the walls back to bare stone and gave them a thin coat of lime. Then we fitted IndiTherm hemp and wood-wool boards and finished the sloping ceilings and the solid sandstone walls in lime plaster. We insulated the loft with Knauf Earthwool 44.
Auchinlay House, Dunblane
An internal wall and room-in-roof project for a homeowner getting ready for a heat pump, who wanted the bedrooms comfortable all year. On the walls we used hemp, wood-wool board and lime plaster, which let the wall dry. The sloping ceilings and dormers got a sealed system of PIR foam board and Superfoil SF19+, and the upper loft got Knauf Earthwool.
Mount Hope, Bridge of Allan
The client was renovating an old sandstone wing of their period home. We fitted 100mm Sisalwool, wood-wool board and lime plaster on four walls, which lets the stone dry. On one large gable wall we took out the dropped ceiling and built an insulated vaulted ceiling in its place.
Belhaven Terrace Lane, Glasgow
A West End owner wanted the whole house warmer. We insulated the ground-floor walls from the inside and the upstairs bedrooms in the roof space. The stone walls got layers that let them dry, because this sandstone soaks up a lot of water. In the sloping ceilings, a sealed layer stops warm, moist air reaching the roof spaces.
Observatory Lane, Glasgow
Internal wall insulation for a client of Oscar J Murray Architects, part of a whole-house renovation in Glasgow’s West End. We fitted IndiTherm hemp on the stone walls, dormers and sloping ceilings, and finished the walls in lime plaster. A Pro Clima Intello membrane went on the sloping ceilings, and Contega Solido tape seals the gaps round the windows.
Protected, and built to the standard the grant requires.
Our workmanship is guaranteed for 25 years. If our workmanship fails, we come back and put it right. We take no deposit, so nothing is paid up front. Payment is on 7-day terms: you are invoiced after completion, once you have seen the finished work and the photographs, and pay within seven days.
We’re TrustMark registered, PAS 2030 accredited and rated 5.0 on Google across more than 100 reviews.
-
25-year workmanship guarantee
A fault in our fitting during that time is ours to come back and fix.
-
TrustMark and PAS 2030 certified
Audited to the standards the grant requires.
-
No deposit
Nothing leaves your bank before the work starts.
-
Payment within 7 days of completion
We invoice after the final lime coat, and you have a week to pay.
Internal Wall Insulation in Morningside: Questions From Flat and Villa Owners
Straight answers on cost, grants, systems and coverage area.
Expect £14,000 to £25,000 for a typical stone flat or house. A household awarded the full £7,500 grant would pay about £6,500 to £17,500 of that, depending on how many walls are lined.
Each option in the quote comes with its own price and the honest case for it.
Book Your Free Survey ↓No, provided the lining leaves the sandstone free to dry. Damp after insulation usually traces back to foam board glued to stone. The survey also looks for cement pointing or a sealed paint outside, which hold water in the wall.
Calum or Lewis checks for existing damp on the survey visit, so point out any patches you have noticed.
Book Your Free Survey ↓Yes, in most cases. Lining an unlisted house from the inside needs no planning permission. A listed building needs listed building consent before any wall is lined.
Have any earlier consent papers or council letters to hand on the survey day, so we can plan the paperwork around them.
Book Your Free Survey ↓Yes, one wall or one room is fine. The survey checks where that wall meets the ceiling, floor and inside walls, so damp has no cold corner to settle in. The same layers suit tenement wall insulation in other rooms later.
On a wall we line, both come off and can’t be saved. The cornice is recreated in lime afterwards, and the survey settles who remakes the shutters. It also measures how deep each lined wall becomes, which is part of planning internal wall insulation around period features.
Around one to three weeks for a whole flat or house, since every lime coat has to dry before the next one. One wall or one room takes much less.
Yes. We book the survey in ahead, and our crew makes the trip from East Kilbride, as it does for internal wall insulation across Edinburgh’s stone tenements and villas.
Book Your Free Survey.
Tell us about your property and we will be in touch to arrange a survey.



