Internal Wall Insulation in Perth for Sandstone Homes That Need to Dry
Built to be done once, your Perth internal wall insulation uses layers chosen for your sandstone and carries a 25-year workmanship guarantee.
Google review
-
Stripped to the stone
-
A lime parge
-
Hemp in the frame
-
Wood-wool board
-
Lime plaster with mesh
-
Finished and painted
Illustration: a vapour-open system on a stone wall
-
Stripped to the stone
-
A lime parge
-
Hemp in the frame
-
Wood-wool board
-
Lime plaster with mesh
-
Finished and painted
Solid Wall Insulation in Perth: What Goes Wrong on Old Sandstone
Your Georgian or Victorian house is cold, and the heating runs all winter to keep up.
-
Internal wall insulation in Perth would fix that, and it raises two worries.
-
One is losing the old features, and the other is trapping damp in the stone.
-
Lining an outside wall brings it about 120mm into the room.
-
Shutters and cornicing on that wall come off, the cornicing is recreated in lime afterwards, and at the survey we agree who does that work.
-
Nearly all of Perth’s Georgian and Victorian houses have solid sandstone walls, with no cavity to fill.
-
The stone takes in rain and dries out again through its lime pointing and plaster.
-
Anything fitted inside has to let that drying carry on.
-
The cheap job is foil-backed plastic foam board stuck to the stone.
-
Damp can then collect where the floor joists rest in the wall, and the timber can rot where nobody sees it.
Botched wall insulation turned out to be common under the ECO4 and GBIS schemes.
The National Audit Office found major defects in around 98% of external and 29% of internal jobs, across more than 30,000 homes.
You can have the warmth and keep the house sound, with the cornicing recreated in lime afterwards.
A first coat of lime goes straight onto the stone, then two layers of Scottish hemp, a wood wool board and lime plaster. Each layer lets the stone keep drying, which is what “breathable insulation” means.
It is the same internal wall insulation build we use on sandstone homes across central Scotland.
Hemp and lime keep your Perth house warm through the winter, and the sandstone goes on drying the way it always has.
Our process
Our Process for Internal Wall Insulation in Perth, From Survey to Lime Finish
We start with a free survey of your walls, and you see the two systems we fit before anyone strips a wall.
-
Step 1
Free Survey and Tailored Design
Calum or Lewis looks over the wall inside and out and asks how you use each room. Your written quote sets out each option with its pros and cons.
-
Step 2: the split
The honest comparison
Your wall’s material, finish and modelling decide which of these two systems suits it.
-
Right for most stone
Natural system that lets stone dry
Lime + hemp or wood wool
Illustration: vapour from the room passes through each layer and the stone keeps drying. - + The wall keeps drying out
- + Can mostly be taken out again later, and keeps the stone healthy
- + Right for most solid sandstone walls
- − Costs more and takes longer to prepare and fit
- − Thicker, so you lose a little more room
-
On the right wall
Membrane system that keeps room moisture out
Pro Clima membrane + insulation
Illustration: the membrane holds vapour from the room back, before it reaches the wall. - + For brick that soaks up little water, or brick that is rendered or painted
- + Can be thinner in some cases
- − Only used where our moisture modelling shows it is safe
- − Wrong for a normal sandstone wall, which soaks up water
-
-
Step 3
Specialist Installation
We strip back to stone and our lime plasterer lays the first thin coat. Frame, hemp and wood wool follow, then two lime coats, each left to dry.
-
Step 4
Aftercare and Guarantee
At handover you get photos of the layers behind the plaster, advice on paints that suit lime and the 25-year workmanship guarantee in writing.
-
Where we say no
What we will not do
Foam board glued onto sandstone
We won’t glue a sealed polystyrene or foam board onto a solid sandstone wall to bring the price down. If that is the only way to a cheaper quote, we will tell you so and advise against it.
Next step
Start with the survey
Know what your Perth house needs before a single wall is stripped.
Ask about shutters, cornicing and the grant, and you get a plain answer to each while we are in the house.
Book Your Free Survey ↓
Inside the wall
Your wall, insulated layer by layer
Each card shows one build going onto a wall, from bare masonry to a finished room, in the order our fitters work. The pictures are illustrations.
Illustration: heritage system
-
Stripped to the stone
Our fitters strip the old plaster and timber laths back to bare sandstone, so no hidden wood is left to rot. Cornicing on these walls comes down too, and is remade in lime after the insulation goes in.
-
A lime parge
Then a coat of lime, called a parge, goes over the stone. It fills the hollows where damp air could sit and turn to water.
-
Hemp in the frame
Our fitters press two 50mm layers of Scottish-made IndiTherm hemp into a 45mm timber frame fixed over the lime. This is the layer that keeps the heat in your room.
-
Wood-wool board
Wood-wool board, a stiff sheet of bound wood shavings, goes over the hemp next. It gives the lime plaster a solid face to grip and still lets moisture pass through.
-
Lime plaster with mesh
Lime plaster goes on next, with a mesh bedded into it.
-
Finished and painted
A smooth lime finish leaves the wall about 120mm further into the room than before. At handover you get paint guidance, so the finish keeps letting the wall dry.
Hemp, wood wool and lime on bare sandstone
This vapour-open build suits most solid sandstone walls. Each layer lets moisture pass, so the stone behind it can keep drying out.
Illustration: membrane system
-
Stripped back to brick
The old plaster comes off the inside of the wall, back to the brick.
-
Hemp packed into a frame
Our fitters pack hemp insulation into a timber frame fixed over the brick.
-
The Intello Plus membrane
A Pro Clima Intello Plus membrane goes across the frame to keep room moisture out of the wall.
-
Plasterboard and skim
Plasterboard goes over the membrane, and a skim coat finishes the wall.
Hemp and a membrane for the right brick wall
Some walls are brick, and where that brick is rendered or takes up little water, a sealed build can suit it better.
It finishes in plasterboard and a skim coat, so it goes in faster than the lime build.
At your survey, Calum or Lewis checks each outside wall, and Calum tells you which build each one suits.
Why Perth Owners of Old Sandstone Houses Choose Us
Insulation planned around how your Perth walls take in damp and dry out.
-
We check the wall before we price it
Calum or Lewis, our surveyor, looks at the stone, pointing, plaster and damp. Outside paint or cement render slows drying, so we note it first.
-
Layers matched to your kind of wall
Smooth-cut stone, rough rubble and rendered brick each hold and lose damp their own way. We match yours to a library of layer designs for Scottish walls, each checked in WUFI moisture software.
-
One lime plasterer, first coat to last
The same trusted lime plasterer works on our heritage jobs and does every coat, from the first thin coat on the stone to the final lime finish.
-
Hemp on the stone, even where foam is cheaper
Hemp costs more than foam board, and we recommend it anyway because sandstone has to dry.
-
Visits planned around the lime drying
Lime needs drying time between coats, so we book each Perth visit ahead and put the dates in writing. Nearer our base, we also fit internal wall insulation for older stone homes in Stirling.
-
Registered for the Home Energy Scotland grant
Home Energy Scotland only funds solid wall insulation through TrustMark-registered installers, and we are one.
The honest bit: period features
Cornicing, shutters and panelling on the walls we insulate have to come off, and they can’t be saved. Cornicing on walls we don’t line stays. Once the insulation is in, the plaster mouldings are recreated in lime, and we agree at the survey who remakes the woodwork.
Solid Wall Insulation Grant in Perth: Prices and the £7,500 Cap
On an old stone house in Perth, internal wall insulation runs £10,000 to £50,000, and typical jobs fall between £14,000 and £25,000.
The price follows how many outside walls you have, and Calum works out your internal wall insulation costs wall by wall from the survey.
We strip each wall back to bare stone first, so old cement or plasterboard on your Perth walls adds to the price.
- GrantUp to 75%, if you qualify
- Walls cap£7,500 in any postcode
- LoanOptional, interest-free, up to £2,500
- InstallerTrustMark-registered
That leaves about £6,500 to pay on a £14,000 job and about £17,500 on a £25,000 job.
- If you qualify, the Home Energy Scotland (HES) grant pays up to 75% of the cost, capped at £7,500 for solid wall insulation.
A rural or island postcode lifts the whole-house cap to £9,000, but walls stay capped at £7,500, so the extra £1,500 only counts if you add another measure, such as a loft.
- HES needs a TrustMark-registered installer, which we are, and HES decides who qualifies.
- You can also ask HES for an interest-free loan, capped at £2,500 for wall work.
- At survey we talk you through how the solid wall grant works for your house.
Rated 5.0 on Google by homeowners across central Scotland.
Solid stone walls need to dry out, and foam board stops them.
-
1Bare solid stone
Old solid stone walls handle damp the way they always have: they soak it up, then let it dry off both the inside and the outside. They have no cavity and no plastic layer, and that works for as long as the wall can keep drying.
-
2Foil-faced foam board
Foil-backed plastic foam board or sealed foam stuck straight onto the inside of the wall stops that drying. Warm, moist air from your rooms still reaches the cold stone behind it, turns to water and has nowhere to go. That trapped water causes the damp people blame on insulation.
-
3Vapour-open build-up
Our system uses lime, hemp and wood wool, which let that moisture pass through and dry off (the trade calls this vapour-open). When we plan the layers for your wall, it stays warm and keeps drying.
Internal wall insulation in Perth, with the damp risk checked first.
Our designs come from WUFI modelling, computer software that tracks how heat and damp move through the wall layers over several years. A solid wall needs that long to settle to a steady moisture level: roughly five years for brick and ten for stone.
-
About 5 yearsbrick, drying to equilibrium
-
About 10 yearsstone, drying to equilibrium
For a typical stone wall, we use a set of layers we have already modelled. A larger, listed or unusual building gets a closer look at survey before we pick from that set. Either way, we can show you the modelled damp result for a wall like yours.
Ask your own questions about internal wall insulation in Perth.
Not sure if your Perth wall is bare stone, painted or rendered? Calum or Lewis checks that at the survey and tells you which lining suits it.
Ballagan Farm, Strathblane
A two-storey farmhouse under full renovation, where poor insulation had left the walls damp. We stripped the walls back to bare stone and gave them a thin coat of lime. Then we fitted IndiTherm hemp and wood-wool boards and finished the sloping ceilings and the solid sandstone walls in lime plaster. We insulated the loft with Knauf Earthwool 44.
Auchinlay House, Dunblane
An internal wall and room-in-roof project for a homeowner getting ready for a heat pump, who wanted the bedrooms comfortable all year. On the walls we used hemp, wood-wool board and lime plaster, which let the wall dry. The sloping ceilings and dormers got a sealed system of PIR foam board and Superfoil SF19+, and the upper loft got Knauf Earthwool.
Mount Hope, Bridge of Allan
The client was renovating an old sandstone wing of their period home. We fitted 100mm Sisalwool, wood-wool board and lime plaster on four walls, which lets the stone dry. On one large gable wall we took out the dropped ceiling and built an insulated vaulted ceiling in its place.
Belhaven Terrace Lane, Glasgow
A West End owner wanted the whole house warmer. We insulated the ground-floor walls from the inside and the upstairs bedrooms in the roof space. The stone walls got layers that let them dry, because this sandstone soaks up a lot of water. In the sloping ceilings, a sealed layer stops warm, moist air reaching the roof spaces.
Observatory Lane, Glasgow
Internal wall insulation for a client of Oscar J Murray Architects, part of a whole-house renovation in Glasgow’s West End. We fitted IndiTherm hemp on the stone walls, dormers and sloping ceilings, and finished the walls in lime plaster. A Pro Clima Intello membrane went on the sloping ceilings, and Contega Solido tape seals the gaps round the windows.
Protected, and built to the standard the grant requires.
Our workmanship is guaranteed for 25 years. If our workmanship fails, we come back and put it right. We take no deposit, so nothing is paid up front. Payment is on 7-day terms: you are invoiced after completion, once you have seen the finished work and the photographs, and pay within seven days.
-
25-year workmanship guarantee
If our workmanship fails, we come back and fix it.
-
TrustMark and PAS 2030 certified
Audited to the standards the grant requires.
-
No deposit
You pay nothing before the work starts.
-
Payment on 7-day terms
We invoice at completion and you have seven days to pay.
Internal Wall Insulation Questions We Hear From Perth Homeowners
Straight answers on cost, grants, systems and coverage area.
Typical jobs cost £14,000 to £25,000. If you qualify for the full £7,500 grant, that comes down to about £6,500 to £17,500.
Each option in the quote comes with its own price and the honest case for it.
Book Your Free Survey ↓Yes, with materials that let damp out. Conservation guidance for old stone warns against foam board, cement render and plastic paints, and hemp and lime avoid all three.
Yes. Lining the walls of a listed building needs listed building consent. If your house sits in a conservation area but is not listed, internal work needs no planning permission.
Have any earlier consent papers or council letters to hand on the survey day, so we can plan the paperwork around them.
Book Your Free Survey ↓On outside walls it comes down and is recreated in lime to the original shape, and at the survey we agree who does that work. The survey also measures how much depth each wall loses.
Yes. We line a flat’s outside walls from inside with the same hemp and lime layers. All the tenement wall insulation work happens inside your own flat.
Home Energy Scotland decides from your exact postcode. A qualifying address gets a £9,000 cap for the whole house, yet wall work alone still stops at £7,500. The higher cap only helps if you insulate a loft or floor as well.
Check your eligibility with Home Energy Scotland, then book the survey so your application has a written price behind it.
Book Your Free Survey ↓Several weeks, because each lime coat has to dry before the next. Where the layout allows, you can stay in while we work room by room.
Book Your Free Survey.
Tell us about your property and we will be in touch to arrange a survey.



