Underfloor Insulation in Alloa: A Warmer Floor for Downstairs Flats and Cottages
A warmer ground floor, usually fitted in one day, with the Home Energy Scotland grant paying up to £1,500 of the cost for eligible Alloa homes.
Underfloor insulation
-
The cold void
-
Wool between the joists
-
Netting underneath
-
A warmer floor
Illustration: underfloor insulation, step by step
-
The cold void
-
Wool between the joists
-
Netting underneath
-
A warmer floor
Cold Floors in Alloa’s Older Tenements and Cottages
The heating is on and the ground floor still feels cold through your socks.
On a windy night, cold air creeps in under the skirting boards. Underfloor insulation in Alloa deals with the cause, which sits under your floorboards.
-
Many of these homes have floorboards over an open gap, with small vents in the outside wall (air bricks) to keep the timber dry.
-
Outside air comes in through those vents and moves under your feet, and nothing stops the cold coming up.
-
In a two-storey tenement, only the downstairs flat has that gap under it.
-
If you live upstairs, the space under your boards is your neighbour’s ceiling, so there’s nothing for us to fill.
-
Newer estates often sit on a concrete floor, and we can’t insulate that from below.
-
Small vents low in your outside wall are the first thing to look for when checking whether your floor is timber or concrete.
-
The crew fits mineral wool on netting between the joists (the beams your boards sit on) and keeps every vent clear, as on all our underfloor insulation work.
-
Insulating under the boards won’t make the floor damp as long as the vents stay open.
“…I felt in safe hands straight away at point of quotation, Calum was knowledgeable and thorough and I trusted his advice… the whole underfloor area being completed in around 4 hours… I can immediately feel a difference with the house being warmer so it was well worthwhile.”
Jamie Drever, Google review
If your household qualifies, the Home Energy Scotland grant pays part of the bill. It never covers the whole job, so there’s always a share left for you to pay.
Your ground floor warms up underfoot, and on a standard job we are usually in and out in a day.
What we actually do
Two ways to insulate your floor, and what each one involves.
There are two ways to insulate a wooden floor with a gap underneath (a suspended timber floor), and the prices are far apart. The cards below cover both, and what goes into each job.
From survey to aftercare
Our Process for an Alloa Floor, From Survey to Boards Back Down
-
Step 1
Survey Visit
Calum or Lewis, our surveyor, looks at the gap under the floor, the joists, the vents and the way in. Nothing gets booked until you’ve read the written quote.
Survey first Before we recommend either job, we check how your floor is built, the space underneath it and the vents that keep that space dry. -
Step 2: the split
One of two ways, picked for your floor
-
The standard job
We fit Knauf Omnifit 40 insulation between the joists (the timber beams under your floorboards), support it so it can’t sag, and seal the gaps where draughts get in. You get a much warmer floor for roughly half the cost of the airtight job.
-
The airtight job
We lift the floor and rebuild it with hemp insulation between the joists. A membrane on the room side keeps moist indoor air out of the space under the floor, and a second membrane underneath lets damp escape. We tape every joint to stop air leaking through. It gives the best result where your floor allows it.
-
-
Step 3
Fitting Day
The crew fits Omnifit 40 mineral wool on netting, checks the vents are clear, puts back any lifted boards and cleans up before leaving. A standard floor takes one day.
Air bricks kept clear We keep the air bricks (the small vents low in your outside walls) clear, so air keeps moving under the floor and the timber stays dry.Boards lifted and re-laid If we can’t get under the floor on a standard job, we lift your floorboards and put them back afterwards, taking extra care with old boards. -
Step 4
Paperwork and Guarantee
We send Home Energy Scotland the paperwork it needs from the installer, and you get your guarantee details to keep with the house papers.
Grant funding and EPC We help with your Home Energy Scotland grant if you qualify, answer your questions about it, and provide a new EPC after the work where you need one. -
The honest bit: which level your floor needs
The standard job suits most of the floors we see. The airtight job costs more, because we rebuild the whole floor with two membranes and taped joints, and the natural insulation costs more too. We will tell you which one your floor and budget call for, and the choice is yours.
Start with the survey
Get a straight answer on your Alloa floor, and your share of the bill in writing.
Upstairs flat or downstairs, we tell you whether there is anything under your boards to fill.
Book Your Free Survey ↓
How each system goes in
Underfloor Insulation Fitted Below Your Alloa Floorboards
Each card below shows one system building up layer by layer, the way we fit it. The pictures are illustrations.
Illustration: standard system
-
The cold void
Each line of light is a gap between your floorboards. Cold air from the air bricks comes up through those gaps and in at the skirtings, into the room you pay to heat.
-
Wool between the joists
We reach the void through one small hatch, and most floors take a day. Knauf Omnifit mineral wool, cut a touch wider than the space between joists, grips them and fills their full depth.
-
Netting underneath
Support netting fixed under the joists holds the wool up, so it can't sag over the years. We photograph it all for you, since you won't be crawling under there to look.
-
A warmer floor
On the first cold Alloa night after we've been, the boards under your socks feel warmer than they did last winter. Up in the room, the draught at the skirtings eases off and less heat escapes through the floor.
Standard underfloor insulation with Knauf Omnifit
When there is room to work in the void below, we fit it from underneath, so your floorboards stay down and the job is usually done in a day.
Our most popular option and superb value when there is access from below. We work in subfloor spaces as shallow as 350mm, fitting 150 to 200mm Knauf Omnifit 40 rolls friction-cut to fill the full joist depth, lagging the heating pipes and fixing insulation support netting underneath so it never sags. Ventilation is kept clear, airbricks are extended where needed, and every access hatch is insulated and screwed back down. A breathable membrane and airtightness tape can be added for extra performance.
Illustration: hemp system
-
Boards up, one room at a time
We lift the floorboards to open up the joists.
-
A hammock between the joists
A thin sheet is slung between the joists and taped round its edges.
-
Hemp cut to fit
IndiTherm hemp is cut to sit snugly in each hammock.
-
Sealed, then boarded
A taped top sheet goes over the joists, then your boards go back down.
Hemp underfloor insulation with airtightness membranes
Hemp suits you if you want a natural, Scottish-made material and the best airtightness, and you are happy for the boards to come up room by room. It costs more than the standard job because the floor is lifted and every join is taped.
For a natural, higher-end floor we fit IndiTherm hemp, made in Scotland by IndiNature, working room by room. We sling a thin sheet between the joists like a hammock, tape it round the edges and cut the hemp to fit snugly inside it. A second sheet goes over the joists, taped down to keep moist room air out of the floor, before the boards go back. Installed from above it gives the highest performance with no compromise on airtightness.
Illustration: PIR board system
-
Battens at your heating level
25mm treated battens are fixed to the joists at your heating design level.
-
Foil-faced board between the joists
PIR is cut tightly to fit between the joists and rests on the battens.
-
Foam edges, taped joins
Foam seals the perimeter and foil tape covers every join.
-
Heating on top
The pipes go in above the board. Then the floor goes back on top.
PIR insulation for underfloor heating
Underfloor heating laid over a cold, ventilated void loses heat downward unless there is insulation beneath it. A foil-faced foam board (PIR) under the heating sends that warmth back up into the room, where you want it.
We recommend high-performance foil-faced PIR, fitted on 25mm treated battens set to your heating design level and cut tightly between the joists, with airtightness foam sealing the perimeter and foil tape over every join. Most underfloor heating contractors do not hold the TrustMark certification for underfloor insulation, so we carry out this element, which keeps up to £1,500 of Home Energy Scotland grant open to you if you qualify. We are happy to work alongside your contractor or recommend a trusted partner.
Underfloor Insulation Installers in Alloa: What You Get When You Pick Us
-
Upstairs flats get an answer by phone
Tell us which floor your flat is on when you call. If there’s nothing under your boards for us to fill, we say so and nobody books a visit.
-
The quote shows the grant before you commit
You see the price for mineral wool, and for hemp if you ask, both before and after the grant.
-
TrustMark registration unlocks the grant
Home Energy Scotland only pays for underfloor work by a TrustMark-registered installer. We’re registered as a company and accredited to PAS 2030, the standard for fitting insulation.
-
Blocked vents are priced in from the start
If a path, patio or extension covers one of the vents at the bottom of your wall, the fix is already in the quote.
-
A second crew for the loft
If the loft insulation needs topping up too, two crews do both on the same day, so you usually need to be home for just one day.
-
Photos of the finished floor
The crew sends you pictures of the insulation between the joists, so you can see the work without crawling under the house.
Underfloor Insulation Grant in Alloa: What a £1,400 to £2,500 Job Costs You
For a warmer ground floor in Alloa, a standard underfloor job costs £1,400 to £2,500.
- GrantUp to 75%, capped at £1,500, if you qualify
- LoanInterest-free, up to £500
- If your household qualifies, Home Energy Scotland pays up to 75%, capped at £1,500 for underfloor, so you pay £350 to £1,000.
- On an £1,800 floor, 75% is £1,350, so you would pay £450. Once a job passes £2,000, the grant stays at £1,500 however much the job costs.
- The natural option is IndiTherm hemp, sealed in with Pro Clima membranes (thin sheets that stop wind blowing through the hemp) and tape. It costs £3,000 to £5,000, or £1,500 to £3,500 after the grant, and the same floor insulation grant rules apply to hemp as to mineral wool.
- Home Energy Scotland decides every application, so treat any grant figure in a quote as an estimate until it replies.
That £1,500 counts towards a limit of £7,500 per home across all the work you claim for. If Home Energy Scotland treats your postcode as rural, the home limit rises to £9,000. Your floor grant stays the same, so the extra only helps on a bigger job that includes solid wall insulation. You can also ask Home Energy Scotland for an interest-free loan, capped at £500 for underfloor.
Three Guarantees on Every Alloa Floor
We fit every Alloa floor to PAS 2030, the installation standard, and we’re on the TrustMark register that Home Energy Scotland funding depends on.
What you get on every floor we insulate:
-
25-year workmanship guarantee
Your installation carries a 25-year workmanship guarantee.
-
TrustMark and PAS 2030 certified
Audited work that meets the standards the grant requires.
-
No deposit
You pay no deposit, so no money leaves your account before the work is done.
-
Payment on 7-day terms
Payment is due within 7 days of the invoice, which only goes out once the floor is finished.
Ask your own questions about underfloor insulation in Alloa.
Check the bottom of your outside wall for small vents first, and if you find them, a survey is worth booking.
Underfloor Insulation in Alloa: What Homeowners Ask Before Booking
The questions we hear most.
Standard mineral wool costs £1,400 to £2,500. If you qualify for the grant, you’d pay £350 to £1,000. Natural hemp costs £3,000 to £5,000 before the grant and £1,500 to £3,500 after it.
Book Your Free Survey ↓Up to 75%, capped at £1,500 for a floor, and you can add an interest-free loan of up to £500. Home Energy Scotland decides who qualifies and only funds TrustMark-registered installers like us.
Book Your Free Survey ↓Yes, if there’s a hatch and room to crawl underneath, your boards stay down. In a shallow gap the crew lifts a run of boards, works from above and puts them back.
Knauf Omnifit 40 mineral wool, packed between the joists with netting underneath to hold it up. Hemp is the natural alternative, fitted from above with the boards up and sealed with membranes and tape.
Not when it’s fitted with the vents kept clear. Air keeps moving under the insulation, and any blocked vent gets an extender to open it up again.
Book Your Free Survey ↓One day for a standard floor, and the crew cleans up before going. A tight gap can stretch into a second day, and the survey tells you beforehand.
Yes, all three, with crews coming out from our East Kilbride base. We also fit underfloor insulation in Stirling itself.
Book your free underfloor survey.
Tell us about your floor and we will be in touch to arrange a survey.



