Underfloor Insulation in Renfrew: The Estate You Live On Narrows It Down
Underfloor insulation in Renfrew for the ground floors under Moorpark, Kirklandneuk and Blythswood, and the ex-council semis among them: usually one day’s work, with up to £1,500 covered by the Home Energy Scotland grant if you qualify.
Underfloor insulation
-
The cold void
-
Wool between the joists
-
Netting underneath
-
A warmer floor
Illustration: underfloor insulation, step by step
-
The cold void
-
Wool between the joists
-
Netting underneath
-
A warmer floor
Moorpark, Kirklandneuk, Dean Park: in Renfrew the estate is the first thing we ask
Your ground floor never quite warms up, however high the heating goes, and the cause is usually under the boards.
Three checks, before you phone anybody:
- Vented grilles low on the outside walls
- A slight give as you cross a room
- Something moving at the skirting in wind
-
In Renfrew’s older homes at Moorpark, Kirklandneuk and Blythswood that means a timber floor over a ventilated void, with air bricks letting cold air in underneath.
That floor can be warm without trapping damp or losing days to builders. Suspended timber floor insulation puts Knauf Omnifit 40 wool between the joists on support netting, and that is how the underfloor system goes in across Renfrew, from below or through lifted boards, with every air brick left clear.
If you qualify, Home Energy Scotland pays up to 75% of the cost, capped at £1,500.
Those three checks come before anyone starts insulating suspended timber floors. The free survey settles whether you have a void or a slab, likelier a slab out at Dean Park.
You get warm boards underfoot through a Renfrew winter, with the air bricks still doing their job.
What we actually do
The right option for your floor, different solutions explained.
There are two ways to insulate a suspended floor, and they sit at very different price points. The cards below cover both, and what goes into each job.
From survey to aftercare
Our simple process
-
Step 1
Free survey & tailored design
Calum or Lewis, our surveyor, visits to establish how the floor is built, measure the void, count the air bricks and work out the access route. You are left with a written quote carrying the full price and the after-grant figure, standard and natural systems costed side by side.
Survey first A survey of the floor construction, the void (the air space under the boards), and how it is ventilated, so we recommend the right approach for your floor. -
Step 2: the split
One of two ways, picked for your floor
-
The standard job
Knauf Omnifit is fitted between the joists and supported so it can’t sag, with the obvious draught paths sealed. A big comfort gain for roughly half the cost of the airtight version.
-
The airtight job
The whole floor lifted and rebuilt: insulation between the joists, sealed on the warm side (the room side), a permeable layer (a sheet that lets damp out) on the cold side, and airtightness tapes throughout. The best result, where it is practical.
-
-
Step 3
Specialist installation
Usually one day. Dust sheets go down first, Omnifit 40 goes in on its support netting, ventilation is checked and kept clear, vent extenders fitted where needed, boards refitted exactly where lifted, every room hoovered before anyone leaves. If the loft is due too, a second crew fits loft insulation the same day instead of two visits.
Airbricks kept clear We keep the airbricks and ventilation paths clear so the void keeps working and the timber stays dry.Boards lifted and relaid Where there is no access from below, we lift and relay your floorboards carefully, taking care with period boards.
-
Step 4
Aftercare & 25-year guarantee
The photograph set follows the job, along with the documents HES needs and a 25-year workmanship guarantee. No deposit at any stage, and the invoice runs on 7-day terms, so the finished floor and the pictures reach you before the bill does.
Grant funding and EPC Home Energy Scotland grant funding where you qualify, with help on any questions, and a post-installation EPC where relevant. -
The honest bit: which level your floor needs
The standard job suits most homes. The fully airtight build-up costs more because the whole floor is lifted. We will tell you honestly which your floor and budget call for, with no upselling.
Next step
A warmer ground floor in Renfrew starts with one free visit.
Ask about the grant, the loft or a four-in-a-block flat, and get a straight answer on the day.
Two crews in one morning keep the disruption to a single day:
“The two crews that arrived were on time and left the place clean afterwards. They were also great with my inquisitive 2 year old as well which was a nice touch.”
Scott Blaikie, ★★★★★ Google Review
Book Your Free Survey ↓
How each system goes in
Underfloor Insulation Fitted Below Your Renfrew Floorboards
Each card below shows one system building up layer by layer, the way we fit it. The pictures are illustrations.
Illustration: standard system
-
The cold void
Each line of light is a gap between your floorboards. Cold air from the air bricks comes up through those gaps and in at the skirtings, into the room you pay to heat.
-
Wool between the joists
We reach the void through one small hatch, and most floors take a day. Knauf Omnifit mineral wool, cut a touch wider than the space between joists, grips them and fills their full depth.
-
Netting underneath
Support netting fixed under the joists holds the wool up, so it can't sag over the years. We photograph it all for you, since you won't be crawling under there to look.
-
A warmer floor
On the first cold Renfrew night after we've been, the boards under your socks feel warmer than they did last winter. Up in the room, the draught at the skirtings eases off and less heat escapes through the floor.
Standard underfloor insulation with Knauf Omnifit
Where the void under your Renfrew floor is deep enough to work in, we fit this from below, so the boards stay down and the job is usually done in a day.
Our most popular option and best value where there is access from below. We fit 150 to 200mm Knauf Omnifit 40 rolls between the joists in subfloor spaces as shallow as 350mm, lagging pipes and fixing support netting so it never sags. Airbricks are extended where needed and hatches insulated. A membrane and airtightness tape can be added for extra performance.
Illustration: hemp system
-
Boards up, one room at a time
We lift the floorboards to open up the joists.
-
A hammock between the joists
A thin sheet is slung between the joists and taped round its edges.
-
Hemp cut to fit
IndiTherm hemp is cut to sit snugly in each hammock.
-
Sealed, then boarded
A taped top sheet goes over the joists, then your boards go back down.
Hemp underfloor insulation with airtightness membranes
For a natural floor we fit IndiNature IndiTherm hemp between the joists, cradled in a sheet that lets damp out underneath. Across the top of the joists goes a second sheet that stops damp air from the rooms getting in, and tape seals every join before the floor goes back. Installed from above, it gives the highest airtightness.
Illustration: PIR board system
-
Battens at your heating level
25mm treated battens are fixed to the joists at your heating design level.
-
Foil-faced board between the joists
PIR is cut tightly to fit between the joists and rests on the battens.
-
Foam edges, taped joins
Foam seals the perimeter and foil tape covers every join.
-
Heating on top
The pipes go in above the board. Then the floor goes back on top.
PIR insulation for underfloor heating
Underfloor heating needs insulation that pushes warmth upwards, and a rigid foam board (PIR) handles that. We recommend high-performance foil-faced PIR on 25mm treated battens set to your heating design level, cut tightly between the joists with airtightness foam sealing the perimeter and foil tape over every join. Not every underfloor heating contractor holds TrustMark for underfloor insulation, so we do this element, which keeps up to £1,500 of grant funding available where you qualify.
Why Renfrew homeowners choose us
-
Two matching houses can still get different prices.
Quotes are set by floor area and void depth.
-
A former council house gets the same survey as anything else.
What is under your boards settles the job.
-
The names in our reviews are the names on our payroll.
Six installers employed full time, backed by our 25-year guarantee.
-
Check the register for the measure itself.
TrustMark and PAS 2030 are held measure by measure, and ours covers floor insulation, which your Renfrew grant claim needs.
-
The photographs show where the insulation stops.
Your photo set shows the joist runs and netting.
-
Home Energy Scotland funds each property on its own.
In a four-in-a-block the flats above and below are two properties with two separate limits, and HES alone rules on eligibility.
Why this is really about airtightness, not “breathing.”
Underfloor insulation fills the gap between your floor joists so the cold void below stops draining heat. How far you take it is the real question.
The void is ventilated on purpose: moisture moves down into the subfloor air and is carried away, so airbricks stay clear. The insulation only has to stop cold air reaching the room and keep moist air out of the timbers.
The airtight build-up goes further. It adds a vapour-control layer (a sheet under the boards that stops steam from the house reaching the timber), a membrane below that lets damp out, and tape round the insulation.
The standard build-up reduces cold-air infiltration, a real improvement, but is not airtight on its own.
- Cuts the cold air rising from the void
- Roughly half the airtight cost
- Quick, and the most common choice
- Membrane upgrade available for airtightness
- Stops cold-air infiltration and thermal bypass
- Keeps moist air out of the structure
- Whole floor lifted, so it costs more
- Not practical for every home
We won’t block the airbricks or seal up the void ventilation to hit a number. That ventilation is what keeps the timber dry, so it stays clear, always.
A warmer, steadier home.
No more draught moving across the floor, a floor that feels warmer underfoot, and rooms that hold their heat for longer.
You feel it most through the colder months, with lower heating bills and a more even temperature across the room.
What underfloor insulation in Renfrew costs, and what the grant leaves to pay
Standard underfloor insulation costs £1,400 to £2,500, depending on floor and access.
- GrantUp to 75%, capped at £1,500, if you qualify
- LoanInterest-free, up to £500
- InstallerTrustMark-registered
- Home Energy Scotland covers up to 75% for households that qualify, capped at £1,500 for a floor, leaving you £350 to £1,000 to pay.
- You can also apply for an interest-free loan of up to £500 on an underfloor job.
- The natural IndiTherm hemp option costs £3,000 to £5,000, typically £1,500 to £3,500 after grant, since the cap stays fixed.
Loft, floor and wall work share a £7,500 cap per property.
A rural or island postcode raises that to £9,000, which only makes a difference once solid wall insulation joins the floor, because the floor on its own stays at £1,500.
Home Energy Scotland decides by postcode whether a Renfrew home counts as rural or island.
- You need a TrustMark-registered installer, which we are, and HES alone decides who qualifies.
Our guarantees
Three commitments, in writing, on every floor we insulate:
-
25-year workmanship guarantee
A 25-year workmanship guarantee on the work we do.
-
TrustMark and PAS 2030 certified
Audited work that meets the standards the grant requires.
-
No deposit
No deposit at any stage. Nothing is invoiced until the floor is finished and closed up.
-
Payment on 7-day terms
Payment on 7-day terms from completion, which is the gap that lets you walk the floor and read the photographs before you pay for either.
Underfloor insulation in Renfrew: your questions answered
Straight answers on cost, access, damp, disruption and grant funding.
It is a strong clue, though not a survey. Moorpark’s 1930s-40s streets and the post-war flats at Kirklandneuk and Blythswood are nearly always floorboards over a ventilated void, what suspended timber floor insulation is designed for. Dean Park and the waterfront housing are likelier concrete slab. A rear extension can break the pattern.
The standard system, Knauf Omnifit 40 on support netting, runs £1,400 to £2,500 before funding, £350 to £1,000 after the Home Energy Scotland grant if you qualify. The natural alternative, IndiTherm hemp with Pro Clima membranes, costs £3,000 to £5,000, or £1,500 to £3,500 after grant. Floor area and access are what moves an underfloor insulation quote up or down.
Book Your Free Survey ↓Yes. The underfloor insulation grant through Home Energy Scotland pays up to 75% of cost if you qualify, capped at £1,500 for a floor. That sits inside a £7,500 cap for the whole property, lifted to £9,000 for rural and island postcodes, though the floor itself never gets more than £1,500. You can also apply for an interest-free loan of up to £500 for this measure. The installer must be TrustMark registered, which we are, and HES alone assesses and decides who qualifies.
Book Your Free Survey ↓Not at all. The measure is decided by what is under your boards, and funding by Home Energy Scotland. How you bought the house is not a test either way. If you currently rent from the council or a housing association, the right first call is your landlord, not us.
No. Damp under a floor comes from lost ventilation, more often to a driveway than an installer. The material sits between the joists, tight to the boards, with the vent gap left as it was. Every air brick is checked, and a vent extender reopens any a path has buried.
Book Your Free Survey ↓Access decides it. Where the void has crawl depth, one hatch or lifted board gets a fitter under the floor. Shallower voids, typical of houses built here between the 1930s and 1950s, more often mean boards up in sections, then relaid where they came from. Usually one visit.
Yes. Renfrew is the historic county town of Renfrewshire, though the council area is run from Paisley, which changes nothing about a floor. Beyond the town we cover Inchinnan, Erskine, Bishopton and Linwood. Closer to Paisley, we fit underfloor insulation in Paisley from the same base.
Book your free underfloor survey.
Tell us about your floor and we will be in touch to arrange a survey.



